Electronic Filter Change Reminder | Honeywell 16200 specs

035-04007-000_R1 16200 OM Eng.fm Page 3 Tuesday, July 29, 2003 1:44 PM

ELECTRONIC FILTER CHANGE REMINDER:

This model air purifier has an electronic filter check to remind you when to check or replace the Main filter based on the air cleaner’s hours of use.

Once a filter has reached the end of its expected life, its light will remain on until it is RESET. You may unplug the air cleaner without interrupting the filter check.

A red LED light will illuminate when it is time to change the filter. Please replace with Honeywell® Main replacement filter number 16216.

You should periodically check the filter. Depending on operating conditions, the Filter should be replaced every 6 months.

To RESET the Electronic Filter Check:

Fig 4

Let the pre-filter air dry completely before inserting back into the unit. If you need to replace this item, please see Consumer Relations section on the next page.

WHEN TO REPLACE THE MAIN FILTER?

These replacement intervals are intended as guidelines only. Useful life expectancy of any filter media is dependent upon the concentration of contaminates going through the system. High concentrations of contaminates such as dust, pet dander and smoking will reduce the useful life of the filter.

NOTE: The Main filter is not washable.

CLEANING AND STORAGE:

We recommend that you clean the air purifier at least once a month and before extended storage. Use only a dry cloth to wipe the external surfaces of the air purifier. DO NOT USE WATER, WAX

POLISH, OR ANY CHEMICAL SOLUTION.

If your Air Purifier will not be used for more than

30 days, we recommend:

Filter Monitor

Reset

When the filter monitor light remains on, it is time to check/replace the Main filter and reset the filter monitor, if needed. With the unit powered on, insert the tip of a ball-point pen or paperclip next to the LED filter check light and hold for approximately 5 seconds until the light turns off (Fig 4). Depending upon your individual usage (environment and hours used), you may need to check and replace the filter more or less frequently. If the Main filter is replaced before the filter monitor light turns on, the filter monitor should be reset at the same time.

MAINTAINING YOUR STAGE 1 WASHABLE PARTICLE PRE-FILTER:

The stage 1 particle pre-filter helps pick up large airborne particles that enter the front grille. This pre-filter can be periodically removed and shaken to clean it. Alternatively, it can be rinsed by hand under warm water.

•Remove the Main Filter from the unit.

•Wrap the Main Filter in an air tight plastic bag.

FREQUENTLY ASKED QUESTIONS:

My Air Purifier is starting to make noise and the air output is less. What’s wrong?

The filters may be dirty. High amounts of contaminates can block the pores in the filter and stop the air from moving through it. Replace the Filter.

How long should I run my Air Purifier?

For best results, you should operate your Air Purifier 24 hours a day. This unit will be more effective when doors and windows are closed.

Can I wash my Main filter?

No. Washing the Main filter will destroy it.

For more troubleshooting tips, visit our website at: www.kaz.com

16200 specifications

The Honeywell 16200 is an advanced multi-channel data acquisition system that is widely recognized for its precision, versatility, and robust performance in various industrial applications. Designed to cater to the increasing demands for accurate data monitoring and control, the 16200 series offers a range of features that make it a preferred choice for professionals in a variety of fields, including manufacturing, aerospace, and research and development.

One of the main features of the Honeywell 16200 is its multi-channel capability, allowing users to monitor and acquire data from multiple sources simultaneously. This scalability is essential for operations where monitoring numerous parameters is crucial for maintaining efficiency and safety. The system supports a variety of input types, including analog, digital, and temperature sensors, enabling it to adapt to diverse measurement needs.

In terms of technology, the Honeywell 16200 is equipped with advanced signal processing capabilities. This includes real-time data analysis, which allows users to make informed decisions based on current data trends rather than relying on delayed feedback. The system's built-in algorithms can filter noise and enhance signal quality, ensuring that the data collected is as accurate and reliable as possible.

The system is also designed with connectivity in mind. It supports industrial networking protocols such as Ethernet and Modbus, facilitating seamless integration with existing systems and enabling remote monitoring and control. This connectivity is crucial in today’s industrial landscape, where real-time data sharing across platforms can significantly enhance operational efficiency.

Another characteristic of the Honeywell 16200 is its user-friendly interface, which simplifies configuration and operation. The intuitive graphical user interface allows engineers and technicians to easily set up measurement parameters, view live data feeds, and analyze historical data without requiring extensive training.

Finally, durability and reliability are hallmarks of the Honeywell 16200. Built to withstand harsh industrial environments, it features rugged construction and protection against dust, moisture, and temperature extremes. This ensures consistent performance even in challenging conditions, making it a trusted solution for critical applications.

Overall, the Honeywell 16200 stands out as a sophisticated solution that meets the rigorous demands of modern industry, combining advanced features with ease of use and robust performance.