State Industries Oil & Dual Fuel Commercial Water Heaters instruction

Large Volume Power Burner: Gas, Oil & Dual Fuel Commercial Water Heaters

■Limited Warranty Outline

–If the tank should leak any time during the ﬁrst three years, under the terms of the warranty, State Water Heaters will repair or replace heater; installation, labor, handling and local delivery extra.

–NOTE: This Outline Is NOT A Warranty. For complete information, consult the written warranty or State Water Heaters.

■TPO – Oil Fired Models: No. 1 or 2 Oil

–Multi-annular fuel containment combustor head

–Available for ﬁring light fuel oils including diesel

–Oil ignition transformer

–Integral 2-stage fuel unit

–Squirrel cage blower

–Oil safety valve

■TPD – Dual Fuel Gas/Oil: Natural Gas or Propane & No. 1 or 2 Oil

–Multi-annular fuel containment combustor head

–Gas electric pilot and gas ignition transformer

–Pilot and main pressure regulators

–Air safety switch

–Manual fuel selector switch

–Integral 2-stage fuel unit

–Squirrel cage blower

■Meets or exceeds current edition of ASHRAE/IES-90.1-1999.

■Low NOX – TPX Low NOX models meet or exceed current Texas and California SCAQMD air quality standards.

■UL – Entire unit UL listed (File No. MH11631).

■Glass-Lined Tank – Exclusive corrosion protection with glass- lining on all interior surfaces. Multiple anodes provide even more corrosion protection.

■ASME Construction Standard – 160 PSI working pressure on all models.

■Powered Gas Burner – Powered burner has electronic ﬂame safeguard control with intermittent spark ignition. Also included are main and pilot automatic gas valves plus gas pressure regulators, diaphragm air switch for proof of blower operation.

–TPX Low NOX Models are factory standard with modulating ﬁre. The burner automatically adjusts the ﬁring rate and the Btu output to maintain precise system temperature control.

■Fully Automatic Controls With Safety Shutoff – High temperature limit control (manual reset). ASME rated temperature and pressure relief valve. Hinged door control compartment for ease of access. Two thermostats, upper and lower, for accurate temperature control. Standard control is for 120˚F - 180˚F water service.

■Jacket And Insulation – Heavy gauge steel with baked powder coat ﬁnish. Insulated with high-density foam insulation that meets or exceeds all required standards.

■Professional Start-Up Service Furnished To Assure Most Efﬁcient Combustion And Safe Initial Start-Up.

■Other Features

–Two layers of high temperature ceramic ﬁber insulation in combustion chamber

–Flame inspection port opening

–Mounted on rugged channel iron skids

–Combination temperature and pressure gauge

–Low water cutoff

–ASME rated temperature and pressure relief valve

–Barometric draft regulator

–Two cleanout inspection openings

–120 volt control circuit

–Drain valve

–Removable lifting lugs

■Options

–Factory Mutual approved control arrangement

–Industrial Risk Insurance (IRI Gas Train)

–5 year or 10 year limited warranty

–High or low water pressure switch

–180°F water service thermostats

–A.G.A. rated T & P Valve

–Modular graphic burner systems management on heaters with 270,000 Btu input and over

–Combustion Air intake Adapter

COMMERCIAL 500 Lindahl Parkway, Ashland City, TN 37015 • www.statewaterheaters.com

The Expert’s Choice®

Oil & Dual Fuel Commercial Water Heaters, Gas specifications

State Industries has long been a trusted name in the water heating industry, providing innovative and efficient solutions for both residential and commercial applications. Among its impressive lineup, the gas, oil, and dual fuel commercial water heaters stand out for their exceptional performance, reliability, and versatility. These units are designed specifically to meet the demanding requirements of commercial establishments such as restaurants, hotels, and hospitals.

One of the standout features of State Industries’ commercial water heaters is their energy efficiency. Many models incorporate advanced insulation technologies, allowing for minimal heat loss and lower energy consumption. The use of high-efficiency burners and innovative heat exchanger designs boosts thermal efficiency, translating to significant savings in operational costs for businesses.

State’s gas water heaters are engineered to deliver robust performance with quick recovery rates, ensuring a constant supply of hot water. They utilize state-of-the-art combustion technology to provide reliable heating while adhering to stringent emissions regulations. The oil-fired models also present impressive performance characteristics, with high heat output and the ability to operate in regions where natural gas is not accessible.

The dual fuel commercial water heaters are particularly remarkable as they offer flexibility for users who want the option to switch between gas and oil fuel sources. This adaptability is a vital feature for businesses that may experience fluctuating fuel prices or supply constraints. Users can select the optimal fuel based on current market conditions or availability, ensuring continued operation and cost-effectiveness.

Among other characteristics, State Industries units are designed with longevity in mind. The tanks are often constructed from durable materials that withstand the rigors of commercial use. Additionally, many models are equipped with features such as anode rods to combat corrosion, further extending their lifespan.

Advanced control systems are another highlight, allowing for precise temperature management and easy monitoring. These intuitive controls increase operational efficiency and enhance user experience.

In conclusion, State Industries' gas, oil, and dual fuel commercial water heaters are an outstanding choice for businesses seeking reliable, efficient, and flexible water heating solutions. Their combination of advanced technology, energy efficiency, and robust construction ensures that they meet the diverse needs of the commercial sector. Whether for cooking, cleaning, or sanitation, these water heaters stand ready to deliver.