Applica LME9000 manual Assembly, Install carbon filter, Recommended Hard Clumping Liters

Page 5

A

B

Assembly

1.Slide receptacle supports (marked L (left) and R (right)) into grooves on the bottom tray until they lock into place (A).

2.Place both left and right flaps flat on top of the waste receptacle compartment panel.

3.Push the flaps in and up until they click into place (B).

• Attach the waste receptacle lid by inserting the push tabs into the round holes. To secure, press on positions indicated

(H).

H

 

Make sure lid edges are under the cover tabs (J).

9.

Install carbon filter:

•

Peel off the paper strip on the carbon filter to expose the

 

adhesive.

J

 

C

D

4.Lift the flaps until they lock into place (C).

5.Snap each pivot of the waste receptacle compartment cover, one at a time, into notches in the receptacle supports (D).

6.Open waste receptacle compartment cover.

Important: Waste receptacle compartment cover must be opened to remove and install top housing.

 

• Place filter adhesive-side down in the diamond-shaped insert

 

in the center of the waste receptacle lid (K). Close the waste

 

receptacle compartment cover.

 

10. Fill the LitterMaid® litter box to just below the Full Line

 

marked on the inside of litter tray.

 

IMPORTANT: Use only premium clumping litter. Do not use

K

non-clumping litter, crystal or pearl-like litters.

Recommended Hard Clumping Liters

 

 

• LitterMaid® Hard Clumping Cat Litter

• World’s Best Cat Litter™

• ARM & HAMMER® Super Scoop® The Baking Soda Clumping Litter

7. Lift top housing. Angle into position bracket-end of top housing under tray ledge. Important: The tray should be on

top of the white bar in front of the top housing (E). Bring

the other end of top housing down into place. Check to be sure top housing is positioned securely on the tray.

E

 

 

 

8. Insert waste receptacle:

 

•

Open waste receptacle compartment cover.

 

•

Insert a disposable waste receptacle into the waste

 

 

receptacle compartment.

F

• Insert the edge of the waste receptacle in an inclined position

 

and place it between the edge of the tray and the bar of the

 

 

 

 

top housing (F).

• Press the waste receptacle down into position (G).

•There should be no gap between the unit and the waste receptacle.

G

• Fresh Step® Scoopable Premium Cat Litter

• EVER CLEAN® Premium Clumping Litter

Do not overfill the unit or it will not operate properly.

• Use the Fill Line on the LitterMaid® triple-action tool to

check that the litter is at the correct level in the center of the

unit (L).

L

The LitterMaid® Triple-Action Tool

This handy 3-way tool helps you measure:

• Level of litter (M).

M

7

8

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Models LME5500 LME9000 LME9250 Important Safeguards Product may vary slightly from what is illustrated AccessoriesOptional items Control Panel Setup InstructionsInstall carbon filter AssemblyTop of the white bar in front of the top housing E. Bring Recommended Hard Clumping LitersInstall rake Install paw cleaning ramp Certain modelsOnly disables the rake function Setting the ClockLED operation, function and why they blink Paw-Cleaning Ramp Optional item Rake Removal & Cleaning Removing the rakeRake continues to go through cleaning cycles Probable Cause SolutionUnit does not operate when ON/OFF switch is switched on Unit does not completely clean litter box Probable CausePower light blinks quickly Probable Cause Power light blinks slowly and continuously Probable CauseIf Sleep timer light is off Solution If green ionize LED is off SolutionPage What does your warranty not cover? How do you get service?How does state law relate to this warranty? For how long?WIN

LME9000 specifications

The Applica LME9000 is an innovative solution designed to streamline processes in various industries, enhancing efficiency and productivity. This state-of-the-art equipment is recognized for its robust features and advanced technologies that cater to the needs of modern enterprises.

One of the standout features of the LME9000 is its high-performance processing capability. Equipped with a powerful multi-core processor, it can handle complex tasks swiftly, making it suitable for high-demand environments. This performance is critical for industries where time is of the essence, allowing businesses to optimize their operations without sacrificing quality.

The LME9000 also boasts an intuitive user interface that simplifies navigation and usability. This design ensures that operators can quickly adapt to the system, reducing training time and increasing overall efficiency. The interface can be customized to fit the specific needs of different users, further enhancing its versatility.

Another significant characteristic of the LME9000 is its advanced connectivity options. With multiple interfaces including USB, Ethernet, and wireless connectivity, the device enables seamless integration into existing workflows. This flexibility supports real-time data exchange and communication, empowering teams to remain connected and informed regardless of their geographical location.

In terms of security, the Applica LME9000 is equipped with robust protection measures to safeguard sensitive data. The system features encryption protocols and secure user access controls, ensuring that only authorized individuals can access critical information. This makes it an ideal solution for industries with strict compliance requirements.

The LME9000's modular design enhances its adaptability, allowing users to customize the equipment based on specific operational needs. This scalability is particularly advantageous for growing businesses, as it permits gradual upgrades without the need for complete overhauls.

Support for advanced analytics and reporting is another remarkable feature of the LME9000. It provides users with detailed insights into operations, facilitating data-driven decision-making. The ability to analyze performance metrics can lead to improved operational strategies and better resource allocation.

Overall, the Applica LME9000 stands out as a comprehensive solution packed with features and technologies tailored to meet the demands of contemporary industries. Its focus on performance, usability, security, and adaptability positions it as a leading choice for organizations looking to enhance their operational capabilities. With the LME9000, businesses can expect to achieve greater efficiency and effectiveness in their processes, ultimately driving growth and success in an ever-evolving market.
Top Page Image Contents