Applica LME9000 Removing Disposable Waste Receptacle, Rake Removal & Cleaning Removing the rake

Page 8

•Before reassembling, spray litter tray surface with nonstick cooking spray or silicone spray, and wipe with a soft, dry cloth. This will help to prevent waste clumps from adhering to the surface of the tray.

Removing Disposable Waste Receptacle

We recommend avoiding contact with waste material. Wear rubber or latex gloves when handling used disposable waste receptacle.

• Depress the two push tabs in the waste receptacle

compartment cover (W). (Detach the disposable waste

receptacle lid from the waste receptacle compartment cover.)

 

• Lift the compartment cover, exposing the closed disposable

W

waste receptacle assembly.

•Press in on all four corners of lid to secure lid to the waste receptacle, pull the disposable waste receptacle edge free

from the tabs holding it in place, lift out and dispose (X). Disposable waste receptacles are available in packages

of 12 or 18 and may be purchased through your local retailer, by visiting our website at www.littermaid.com, or by calling us

Xat 1-800-738-0245. We will be happy to assist you in any way we can.

Rake Removal & Cleaning

Removing the rake:

The rake can be removed for easy cleaning.

We recommend wearing rubber or latex gloves when handling the soiled rake.

•Be sure rake is in the home position.

•Grasp rake ledge underneath logo and slide up and off of unit.

•Clean rake with a soft cloth using warm water and mild detergent. Do not use scouring pads or harsh or abrasive chemicals. Spray rake lightly with nonstick cooking spray or a silicone spray before reinstalling.

Note: Rake may be cleaned while installed by using the LitterMaid® triple- action tool.

Paw-Cleaning Ramp: (Optional item)

• Remove mat by gently pulling on the fabric strip provided

(Y).

• The mat is held in place by 5 tabs and will remove easily.

• Remove and clean carpet by using a vacuum cleaner.

• To return it to its original position, reinsert carpet under the

Y tabs. It is not necessary to remove the plastic ramp to clean the mat.

Note: For small stains, moisten a sponge with mild detergent and cold water; wipe to clean. Do not use soaps or chemical cleaners, as they may be harmful to your cat.

Caution: Do not place carpet in washer or dryer. Do not vacuum carpet when it is wet.

13

Troubleshooting

Rake continues to go through cleaning cycles.

Probable Cause:

•Too much litter in the litter box is causing excess litter to collect behind the rake, preventing it from returning to home position. Or, there is an obstacle in front at the rake. If the rake cannot move an obstacle during the cleaning cycle, the unit will go through a cleaning cycle up to five times in an attempt to clear the obstacle. If unsuccessful, the rake will return to its home position, and the green light will blink slowly (1 time per second), indicating that the rake has encountered an obstacle

it cannot move.

Solution:

1. Turn the ON/OFF switch to OFF.

Important: When the ON/OFF button is in the OFF position it only disables the rake function.

2.Clear the obstacle.

Be sure litter in tray is just below the Full Line. Use the LitterMaid® triple- action tool to measure the level of the litter in the center of the unit. Full Line will not be visible if tray is overfilled.

3.Turn the ON/OFF switch to ON.

4.The rake will run through a complete cleaning cycle. When cycle is finished, the unit is ready for use.

Unit does not operate 10 minutes after cat leaves.

Probable Cause:

• Dusty sensors (Sensors need to be covered for 5 seconds to activate.)

Solution:

1.Wipe each sensor with a soft, dry cloth.

2.Turn the ON/OFF switch to OFF.

Important: When the ON/OFF button is in the OFF position it only disables the rake function.

3.Turn the ON/OFF switch to ON.

4.Unit will run through a cleaning cycle.

14

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Models LME5500 LME9000 LME9250 Important Safeguards Accessories Product may vary slightly from what is illustratedControl Panel Setup Instructions Optional itemsAssembly Install carbon filterTop of the white bar in front of the top housing E. Bring Recommended Hard Clumping LitersInstall paw cleaning ramp Certain models Install rakeOnly disables the rake function Setting the ClockLED operation, function and why they blink Rake Removal & Cleaning Removing the rake Paw-Cleaning Ramp Optional itemRake continues to go through cleaning cycles Probable Cause SolutionUnit does not completely clean litter box Probable Cause Unit does not operate when ON/OFF switch is switched onPower light blinks slowly and continuously Probable Cause Power light blinks quickly Probable CauseIf Sleep timer light is off Solution If green ionize LED is off SolutionPage How do you get service? What does your warranty not cover?How does state law relate to this warranty? For how long?WIN

LME9000 specifications

The Applica LME9000 is an innovative solution designed to streamline processes in various industries, enhancing efficiency and productivity. This state-of-the-art equipment is recognized for its robust features and advanced technologies that cater to the needs of modern enterprises.

One of the standout features of the LME9000 is its high-performance processing capability. Equipped with a powerful multi-core processor, it can handle complex tasks swiftly, making it suitable for high-demand environments. This performance is critical for industries where time is of the essence, allowing businesses to optimize their operations without sacrificing quality.

The LME9000 also boasts an intuitive user interface that simplifies navigation and usability. This design ensures that operators can quickly adapt to the system, reducing training time and increasing overall efficiency. The interface can be customized to fit the specific needs of different users, further enhancing its versatility.

Another significant characteristic of the LME9000 is its advanced connectivity options. With multiple interfaces including USB, Ethernet, and wireless connectivity, the device enables seamless integration into existing workflows. This flexibility supports real-time data exchange and communication, empowering teams to remain connected and informed regardless of their geographical location.

In terms of security, the Applica LME9000 is equipped with robust protection measures to safeguard sensitive data. The system features encryption protocols and secure user access controls, ensuring that only authorized individuals can access critical information. This makes it an ideal solution for industries with strict compliance requirements.

The LME9000's modular design enhances its adaptability, allowing users to customize the equipment based on specific operational needs. This scalability is particularly advantageous for growing businesses, as it permits gradual upgrades without the need for complete overhauls.

Support for advanced analytics and reporting is another remarkable feature of the LME9000. It provides users with detailed insights into operations, facilitating data-driven decision-making. The ability to analyze performance metrics can lead to improved operational strategies and better resource allocation.

Overall, the Applica LME9000 stands out as a comprehensive solution packed with features and technologies tailored to meet the demands of contemporary industries. Its focus on performance, usability, security, and adaptability positions it as a leading choice for organizations looking to enhance their operational capabilities. With the LME9000, businesses can expect to achieve greater efficiency and effectiveness in their processes, ultimately driving growth and success in an ever-evolving market.
Top Page Image Contents