7. Set Fabric Selector (on select models only).
TLW2110N
8.Select Extra Rinse (on select models only) if desired.
TLW2111N
9.Select the cycle according to the type of fabric being washed. Push the timer knob in and turn clockwise to the desired cycle and wash time.
10.Pull the timer knob out to start the water fill. Agitation will begin when the water reaches the level you selected.
NOTE: Lid must be closed for agitation and spin to start.
The washer will stop (pause) shortly before the wash and rinse spins. Do not turn the timer through these pauses. They are part of the cycle.
Timer
Although the washer cycles are automatic, the timer may be reset to lengthen, shorten or repeat a portion of a cycle.
To set or reset the timer, push timer knob in to stop the washer. Hold timer knob in firmly while turning it clockwise to the setting desired. Pull timer knob out to start the washer.
Manual Soaking
Set the timer knob in the center of the word “RINSE” (this prevents the washer from spinning without first filling with water). Place the soaking product and clothes load in the washtub. Pull timer knob to start washer fill. After fill is completed and agitation has started, (lid must be closed) push the timer knob in. This will stop the washer. When the clothes have soaked the desired length of time,
TURN THE TIMER KNOB TO THE START OF THE SPIN SETTING, then pull the timer knob out to start the spin.
C A U T I O N
Failure to turn the timer knob to the spin cycle and completely drain the washtub after soaking will result in the washer overflowing and cause property damage.
W524
202147
© Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT