Whirlpool WHES40 operation manual Turn OFF Water Supply, Install the Brine Tank Overflow Elbow

Page 9

Installation Instructions

TURN OFF WATER SUPPLY

1. Close the main water supply valve, located near the well pump or water meter.

2. Open all faucets to drain all water from house pipes. NOTE: Be sure not to drain water from the water

heater, as damage to the water heater ele- ments could result.

INSTALL THE BRINE TANK OVERFLOW ELBOW

Install the brine tank overflow grommet and elbow in the 13/16” diameter hole in the back of the salt storage tank sidewall.

NOTE: The brine tank overflow elbow accepts either 1/2” or 3/8” I.D. hose.

MOVE THE WATER SOFTENER INTO PLACE

Excessive Weight Hazard

Use two or more people to move and install water softener.

Failure to do so can result in back or other injury.

1. Move the water softener into the desired location. Set it on a solid, level surface.

IMPORTANT: Do not place shims directly under the salt storage tank to level the softener. The weight of the tank, when full of water and salt, may cause the tank to fracture at the shim.

2. Visually check and remove any debris from the water softener valve inlet and outlet ports.

3. Make sure the turbine assembly spins freely in the "out" port of the valve.

4. If not already done, put a light coating of silicone grease on the single bypass valve o-rings.

5. Push the single bypass valve into the softener valve as far as it will go. Snap the two large holding clips into place, from the top down as shown in Figures 11 & 12.

IMPORTANT: Be sure the clips snap firmly into place so the single bypass valve will not pull out.

Nozzle

Top Cover

Venturi

Brine Tank

Assembly

Overflow

Nut -

Elbow

Ferrule

 

Salt

 

Hole

Brine Tank

Cover

 

Overflow

 

Grommet

Brine

13/16” Hole

Tubing

Brinewell

Salt

Cover

Storage

Brinewell

Tank

Float Stem

Stand

Tube

Brine

 

Valve

FIG. 10

Clip

Channel

Single Bypass Valve

FIG. 11

CORRECT ASSEMBLY

Clip

Outside diameter

Outside diameter

 

of water softener

of clip channel on

FIG. 12

valve inlet & outlet

single bypass valve

NOTE: Be sure all 3 tabs of the clip go through the matching holes on the water softener valve inlet or outlet, and fully into the channel on the single bypass valve.

Make sure that the tabs are fully seated.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Model WHES40 Table of Contents Salt Storage Capacity 200 lbs Specifications & DimensionsYour safety and the safety of others are very important Water Softener SafetyWater Conditioning Information Inspect ShipmentIron SedimentProper Order to Install Water Treatment Equipment Installation RequirementsLocation Requirements Plumbing CodesInlet / Outlet Plumbing Options Valve Drain RequirementsTypical Installation Installation InstructionsInstall the Brine Tank Overflow Elbow Turn OFF Water SupplyMove the Water Softener Into Place Install Valve Drain Hose Install Salt Storage Tank Overflow HoseComplete Inlet and Outlet Plumbing Test for Leaks Sanitize the Water Softener / Sanitize After ServiceADD Water and Salt to the Salt Storage Tank Plug in the Water SoftenerProgramming the Water Softener SET Time of DAYSET Water Hardness Number SET Recharge Regeneration Time SET Salt TypeStart a Recharge Recharge Customizing Features / OptionsRecharge Scheduled SET Salt LevelPower Outage Memory Water Flow IndicatorSalt Efficiency Clean Feature Minutes Clean / Clear Water Iron ReductionMaximum Days Between REGENERA- Tions 12 or 24 Hour ClockCleaning the Nozzle & Venturi Routine MaintenanceAdding Salt Breaking a Salt BridgeTroubleshooting Automatic Electronic DiagnosticsManualadvance Diagnostics Manualadvance Regeneration Check Softener Exploded View PWA Softener Parts ListValve Exploded View Valve Parts List

WHES40 specifications

The Whirlpool WHES40 is a highly efficient water softener designed for homeowners seeking to improve their water quality. With a capacity of 40,000 grains, this system is tailored for medium to large households, effectively providing softened water for various applications. One of the standout features of the WHES40 is its advanced demand-initiated regeneration technology, which ensures that the system regenerates only when necessary. This not only saves on salt and water usage but also extends the lifespan of the unit.

Equipped with a user-friendly digital control panel, the WHES40 allows users to easily monitor and manage settings. The system features a self-cleaning sediment filter that helps to remove particulates from incoming water, reducing the risk of system clogs and enhancing overall performance. Additionally, this water softener uses high-efficiency resin that improves ion exchange, resulting in softer water that helps to reduce scale buildup on plumbing fixtures and appliances.

Another noteworthy characteristic of the Whirlpool WHES40 is its easy installation process. The system comes with comprehensive instructions and necessary components, making it manageable for most homeowners to set up without needing professional assistance. Furthermore, the compact design of the unit ensures that it can fit seamlessly into utility spaces without occupying excessive room.

The WHES40 is also designed to be environmentally friendly. By reducing the hardness of water, it helps to lower energy consumption associated with heating water and prolongs the lifespan of water-using appliances. The enhanced water quality also leads to benefits such as softer skin and hair, improved laundry outcomes, and better tasting water.

In summary, the Whirlpool WHES40 stands out for its efficient performance, ease of use, and eco-friendliness. Its demand-initiated regeneration, user-friendly controls, and robust design make it a reliable choice for families looking to enhance their water quality and protect their plumbing systems from the effects of hard water. With a commitment to quality and innovation, Whirlpool continues to provide solutions that meet the diverse needs of homeowners.
Top Page Image Contents