Whirlpool T-K2 installation manual

Page 19

DANGER

Vapors from flammable liquids will explode and catch fire causing death or severe burns.

Do not use or store flammable products such as gasoline, solvents or adhesives in the

same room or area near the water heater.

Keep flammable products:

 

Vapors:

1.

Far away from heater.

 

1.

Cannot be seen

2.

In approved containers.

 

2.

Vapors are heavier than air

3.

Tightly closed

 

3.

Go a long way on the floor

4.

Out of children's reach

 

4.

Can be carried from other rooms

 

 

 

 

to the main burner by air currents.

 

 

 

 

 

WARNING: Do not install water heater where flammable products will be stored.

Read and follow water heater warnings and instructions. If owner's manual is missing, contact the retailer or manufacturer.

WARNING

The outlet hot water temperature of the T-K2 water heater is factory set 120 ° F.

WARNING: Use this heater at your own risk. The set outlet water temperature can cause severe burns instantly or death from scalds. Test the water before bathing or showering.

Do not leave children or the infirm without supervised

DANGER

Hot Water Heater temperature over 125 ° F can cause severe burns instantly or death from scalding.

Children, disabled and elderly are at the highest risk of being scalded.

Feel water temperature before bathing or showering. Temperature limiting valves are available, ask professional person.

WARNING: California Proposition 65 lists chemical substances known to the state to cause cancer, birth defects, death, serious illness or other reproductive harm. This product may contain such substances, be their origin from fuel combustion (gas, oil) or components of the product itself.

Image 19
Contents Flash Water Heater Model T-K2 K2Instantaneous Water HeaterSpecifications Table of ContentsFor Your Safety Operation Freeze Prevention Accessories InstallationElectrical Connections Wiring Diagrams Page Page Natural Gas Supply Piping Gas Supply PipingPropane Supply Piping Pressure Relief Valve Water PlumbingOutdoor Clearances Wall Hanging InstallationStanding Installation Outdoor InstallationCombustible Air Supply Indoor InstallationExhaust Venting Manufactured Home Mobile Home InstallationIndoor Installation Outdoor InstallationInitial Operation Initiating the ApplianceSpace Heating Application Dual-purpose hot water heating Domestic and Heating For Your Safety Read Before Operating Page K2 with Storage Tank ApplicationsRecirculation It Takes Too Long to Get Hot Water TroubleshootingMaintenance Water Isn’t Hot EnoughT-K2 Will Not Initiate Error CodesPage Optional Items Indoor NG Dipswitch Settings K2 Dipswitch Temperature SettingsOutdoor NG Dipswitch Settings Outdoor LP Dipswitch Settings Indoor LP Dipswitch SettingsComputer board assembly Case assembly Burner assembly Water way assembly K2 Parts List Flow Rate vs. Temperature

T-K2 specifications

The Whirlpool T-K2 is a state-of-the-art tankless water heater that exemplifies advanced engineering and innovation. Designed for both residential and commercial applications, this model sets a benchmark in energy efficiency, performance, and convenience.

One of the main features of the T-K2 is its compact size. Unlike traditional water heaters that occupy significant space with bulky tanks, the T-K2 can be mounted on walls, making it an ideal choice for properties where space is at a premium. This feature alone appeals to homeowners and businesses alike who are looking to maximize their usable area without compromising on hot water supply.

In terms of performance, the T-K2 boasts impressive heating capabilities. It can provide up to 6.6 gallons of hot water per minute, ensuring that users have a continuous and reliable supply of hot water on demand. This makes it perfect for households with multiple bathrooms or businesses that have high hot water consumption requirements, such as restaurants and salons.

The T-K2 employs advanced technology for enhanced energy efficiency. Utilizing a modulating gas valve, it intelligently adjusts the amount of fuel being burnt based on the demand for hot water, resulting in optimal energy use and reduced operating costs. With an impressive energy factor rating, this model helps consumers save on their utility bills while also contributing to environmental sustainability.

Safety features are also paramount in the design of the Whirlpool T-K2. It comes equipped with an overheating protection system that automatically shuts down the unit if it begins to operate outside of the safe temperature range. Additionally, the unit has a freeze protection feature, ensuring that it can withstand cold temperatures without compromising performance.

Another key characteristic of the T-K2 is its ease of maintenance. The unit includes a straightforward digital display that provides useful diagnostic information, helping both homeowners and technicians quickly assess any issues. Its design allows for easy access to interior components, simplifying routine servicing and upkeep.

In summary, the Whirlpool T-K2 is a thoughtful combination of innovation, efficiency, and safety. With its compact design, reliable performance, advanced energy-saving technology, and numerous safety features, it stands out as a superior choice for anyone in need of an effective, high-quality tankless water heater. Whether for residential or commercial use, the T-K2 by Whirlpool is truly a leader in the industry.