Initiating the Appliance, Initial Operation

Initiating the Appliance

For your safety, read before operating.

WARNING: If you do not follow these instructions exactly, a fire or explosion may result causing property damage, personal injury or loss of life.

a)This appliance does not have a pilot. It is equipped with an electronic ignition device, which automatically lights the burner. Do not try to light the burner by hand.

b)Before operating, check for gas accumulation in the area around the appliance. Pay special attention near the floor, because gas is often heavier than air, and it may accumulate near the floor.

c)Do not attempt to open the manual gas shutoff valve with anything but by hand. Never use tools. If the valve will not open by hand, do not try to repair it. Instead, call a qualified service technician. Force or attempted repair may result in a gas leak, fire or explosion.

d)Do not use this appliance if any part has been under water. Immediately call a qualified service technician to inspect the appliance and to replace any part that may have been damaged by being under water.

WARNING: IF YOU SMELL GAS:

•Do not use any appliance.

•Do not touch any electric switch, do not use any phone in your building.

•Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.

•If you cannot reach your gas supplier, call the fire department.

Initial Operation

1.STOP! Do not operate without reading the safety information first!

2.Switch off the electrical power supply to the heater.

3.Do not attempt to light the burner manually.

4.Turn the manual gas control valve located on the outside of the unit counterclockwise to the OFF position.

5.Wait five (5) minutes to clear out any gas. If you then smell gas, STOP! Follow “b” in the “Initiating the Appliance” section above. If you do not detect gas, proceed to the next step.

6.Turn the manual gas control valve located on the outside of the unit clockwise to the ON position.

7.Turn on the electrical power to the appliance.

8.Turn on any tap, and the T-K2 will initiate itself.

9.If the appliance will not operate, follow the instructions in the “Turning Off the Gas Supply to the Appliance” section following, and call a service technician or gas supplier.

TURNING OFF THE GAS SUPPLY TO THE APPLIANCE

Close the manual valve on the gas inlet line. Turn off the power supply.

Manifold pressure tap.

T-K2 specifications

The Whirlpool T-K2 is a state-of-the-art tankless water heater that exemplifies advanced engineering and innovation. Designed for both residential and commercial applications, this model sets a benchmark in energy efficiency, performance, and convenience.

One of the main features of the T-K2 is its compact size. Unlike traditional water heaters that occupy significant space with bulky tanks, the T-K2 can be mounted on walls, making it an ideal choice for properties where space is at a premium. This feature alone appeals to homeowners and businesses alike who are looking to maximize their usable area without compromising on hot water supply.

In terms of performance, the T-K2 boasts impressive heating capabilities. It can provide up to 6.6 gallons of hot water per minute, ensuring that users have a continuous and reliable supply of hot water on demand. This makes it perfect for households with multiple bathrooms or businesses that have high hot water consumption requirements, such as restaurants and salons.

The T-K2 employs advanced technology for enhanced energy efficiency. Utilizing a modulating gas valve, it intelligently adjusts the amount of fuel being burnt based on the demand for hot water, resulting in optimal energy use and reduced operating costs. With an impressive energy factor rating, this model helps consumers save on their utility bills while also contributing to environmental sustainability.

Safety features are also paramount in the design of the Whirlpool T-K2. It comes equipped with an overheating protection system that automatically shuts down the unit if it begins to operate outside of the safe temperature range. Additionally, the unit has a freeze protection feature, ensuring that it can withstand cold temperatures without compromising performance.

Another key characteristic of the T-K2 is its ease of maintenance. The unit includes a straightforward digital display that provides useful diagnostic information, helping both homeowners and technicians quickly assess any issues. Its design allows for easy access to interior components, simplifying routine servicing and upkeep.

In summary, the Whirlpool T-K2 is a thoughtful combination of innovation, efficiency, and safety. With its compact design, reliable performance, advanced energy-saving technology, and numerous safety features, it stands out as a superior choice for anyone in need of an effective, high-quality tankless water heater. Whether for residential or commercial use, the T-K2 by Whirlpool is truly a leader in the industry.