Electrical Requirements, Power Supply Cord

Electrical Requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

The electrical ratings for your air conditioner are listed on the model and serial number label. The model and serial number label is located behind the front panel on the front flange above the coil area.

Specific electrical requirements are listed in the chart below. Follow the requirements for the type of plug on the power supply cord.

Power supply cord

Wiring requirements

■ 115-volt (103.5 min. - 126.5 max.)

■ 0-12 amps

■ 15-amp time-delay fuse or circuit breaker

■ Use on single outlet circuit only.

Recommended ground method

This air conditioner must be grounded. This air conditioner is equipped with a power supply cord having a grounded 3 prong plug. To minimize possible shock hazard, the cord must be plugged into a mating, grounded 3 prong outlet, grounded in accordance with all local codes and ordinances. If a mating outlet is not available, it is the customer's responsibility to have a properly grounded 3 prong outlet installed by a qualified electrical installer.

It is the customer's responsibility:

■To contact a qualified electrical installer.

■To assure that the electrical installation is adequate and in conformance with National Electrical Code, ANSI/NFPA 70 - latest edition, and all local codes and ordinances.

Copies of the standards listed may be obtained from:

National Fire Protection Association

One Batterymarch Park

Quincy, MA 02269

Power Supply Cord

NOTE: Your unit’s device may differ from the one shown.

	B
	A
TEST	RESET

A. Reset button

B. Test button

This room air conditioner is equipped with a power supply cord required by UL. This power supply cord contains state-of-the-art electronics that sense leakage current. If the cord is crushed, the electronics detect leakage current and power will be disconnected in a fraction of a second.

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

To test your power supply cord:

1.Plug power supply cord into a grounded 3 prong outlet.

2.Press RESET.

3.Press TEST (listen for click; Reset button will trip and pop out).

4.Press and release RESET (listen for click; Reset button will latch and remain in). The power supply cord is ready for operation.

NOTES:

■The Reset button must be pushed in for proper operation.

■The power supply cord must be replaced if it fails to trip when the test button is pressed or fails to reset.

■Do not use the power supply cord as an off/on switch. The power supply cord is designed as a protective device.

■A damaged power supply cord must be replaced with a new power supply cord obtained from the product manufacturer and must not be repaired.

■The power supply cord contains no user serviceable parts. Opening the tamper-resistant case voids all warranty and performance claims.

ACM122XR0 specifications

The Whirlpool ACM122XR0 is a standout kitchen appliance that combines functionality, efficiency, and modern design. This versatile countertop microwave provides users with an array of features that cater to a variety of cooking needs. One of its most impressive attributes is its 1.2 cubic feet of cooking space, allowing users to accommodate a wide range of dishes, from reheating leftovers to preparing full meals.

The unit boasts a powerful 1200 watts of cooking power, ensuring that food is heated evenly and efficiently. With multiple power levels available, users can tailor the microwave's performance to suit different types of food and cooking requirements. The presence of a turntable further aids in optimizing cooking by ensuring that food is cooked from all angles, enhancing the overall heating process.

One of the key technologies incorporated into the Whirlpool ACM122XR0 is its one-touch cooking functions. These pre-programmed buttons simplify the cooking process, allowing users to quickly access settings for popular items such as popcorn, baked potatoes, or reheating beverages. This feature is particularly beneficial for busy households where convenience is essential.

In addition to its user-friendly design, the ACM122XR0 is equipped with sensor cooking technology. This innovative feature monitors the moisture level of food as it cooks, automatically adjusting cooking time and power levels to achieve optimal results. As a result, users can enjoy perfectly cooked meals without the constant need to monitor the cooking process.

Another notable characteristic of the Whirlpool ACM122XR0 is its easy-to-clean surface. The stainless steel interior and exterior not only add a modern touch to any kitchen but are also designed to resist staining and odors, making maintenance a breeze. The microwave's sleek design is complemented by a sophisticated control panel, which is intuitive and straightforward, ensuring that users can operate the appliance with ease.

In terms of safety, the ACM122XR0 includes a child lock feature, offering peace of mind in households with young children. This additional layer of security prevents accidental operation, making it a family-friendly choice.

Overall, the Whirlpool ACM122XR0 microwave is a multifaceted appliance that enhances kitchen efficiency. Its blend of powerful cooking capabilities, user-friendly features, and modern design makes it an excellent choice for any kitchen. Whether used for reheating, cooking, or defrosting, this microwave adapts to a variety of cooking styles, making it an essential appliance for modern living.