Whirlpool ACM122XR0 Position the Air Conditioner, Complete Installation, Front View, Top View

Position the Air Conditioner

■Handle air conditioner gently.

■Be sure your air conditioner does not fall out of the opening during installation or removal.

■The place where the power cord exits the air conditioner should be no more than 4 ft (122 cm) from a grounded 3 prong outlet.

■Do not block the louvers on the front panel.

■Do not block the louvers on the outside of the air conditioner.

1.Center air conditioner in window. Check that lower rail of air conditioner is behind and against back side of windowsill. Lower window sash to hold air conditioner in place.

A

A. Window sash

2.Check that air conditioner cabinet is tilted to the outside so that water will run to the outside.

3.Pull left-hand curtain out until it fits into the window channel. Repeat with right-hand curtain.

Front View

A

B

A. Left curtain

B. Window channel

4.Insert one of the #8 x ³⁄₄" round-head screws through left- hand curtain and into the window channel or through alternate hole at the top of the curtain and into the window sash to fasten the curtain to the window.

Top View

B

A

C

A. Left curtain

B. Window channel

C. #8 x ³⁄₄" round-head screw

5.Repeat for right-hand curtain.

A

B

A.Alternate hole

B.Left curtain

Complete Installation

1.Insert foam seal behind the top of the lower window sash and against the glass of the upper window.

A

B

A. Lower window sash

B. Foam seal

2.Place window-lock bracket on top of lower window and against upper window sash.

3.Use a ³⁄₃₂" drill bit to drill a starter hole through the hole in the bracket into the window sash.

6