3l Choose the type of decorative molding you

3l Choose the type of decorative molding you

want to use around the room side of the cabinet. Your choice affects the finish frame

alignment with the inside wall. When using a

wood, metal or plastic molding, the finish frame should almost line up with the inside wall. If the wall is plastered to the cabinet

and no molding is used, the finish frame must be set into the wall by l/2” (see Figure 4

for frame construction or Figure 5 for brick

veneer construction). Cut through two studs for support.

Figu

ENTRYON LEFT SI

CONSTRUCTION

4. Provide an opening through the wall for a finish frame. Observe all local governing codes

and ordinances. For wall opening dimensions, use those shown in Figure 6 and add wood

frame thickness (use 1” lumber or heavier).

When determining finish frame thickness, be sure you do not cover side cabinet louvers. A 4” minimurn clearance between sidecabinet

louvers and adjoining wall allows for proper airflow into air conditioner,

FIANGE ON BolToM OF

CABINET.)

5l Construct finish frame. Apply creosote or

something equal to the outside exposed surface

6. Install the finish frame in the wall opening. Square and level frame and nail it securely to the studs.

7l Remove front panel by pushing top down and out. This protects the panel from damage and

makes the air condtioner easier to handle

during installation (see Figure 7).

8l Slide unit out of cabinet. First, disconnect the

green ground wire at the left-front corner of base unit by removing retaining screw (save screw for reuse later). Now slide unit out of cabinet by pulling on handle at bottom (see Figure 7).

9. Insert exterior cabinet through wall opening.

Leave l-3/16” minimum projection into the room at service cord exit hole in cabinet, after allowing for trim. For proper outward water

drainage, shim or reposition cabinet to pro-

vide the proper downward tilt to the outside (1 !‘2” bubble or 114” and side-to-side leveling.

10l Fill all spaces between cabinet and finish frame with insulation.

ACE184XM0 specifications

The Whirlpool ACE184XM0 is a remarkable air conditioning unit that combines efficiency with innovative technology to provide optimal comfort for residential spaces. Designed for versatility, it serves both cooling and heating purposes, making it suitable for various climates and seasonal changes.

One of the standout features of the ACE184XM0 is its powerful cooling capacity. With a cooling capacity of 1.5 tons, it is well-equipped to cool rooms up to 150 square feet efficiently. This makes it an ideal choice for living rooms, bedrooms, or office spaces, ensuring that users can enjoy a comfortable indoor environment even during the hottest summer days.

In addition to cooling, the ACE184XM0 includes a heating mode, allowing it to function as an effective heater during the colder months. This dual functionality not only enhances year-round usability but also reduces the need for additional heating devices, making it a cost-effective solution for climate control.

The unit features advanced inverter technology that ensures energy-efficient operation. This technology adjusts the compressor's speed based on the cooling or heating demand, which results in lower energy consumption compared to traditional air conditioning units. The inverter functionality translates to quieter operation and reduced electricity bills, making the ACE184XM0 an environmentally friendly option.

Another key characteristic of the ACE184XM0 is its user-friendly interface. Equipped with a remote control, users can easily adjust settings without having to leave their comfort zones. The easy-to-read display on the unit also lets users monitor temperature settings, fan speed, and operational modes at a glance, enhancing the overall user experience.

Furthermore, the Whirlpool ACE184XM0 incorporates an anti-dust filter that helps to purify the air, removing dust particles and allergens from the indoor environment. This feature is especially beneficial for those with allergies, as it promotes cleaner air quality.

In summary, the Whirlpool ACE184XM0 is a versatile and efficient air conditioning unit that pairs powerful performance with innovative features. Its dual cooling and heating modes, inverter technology, user-friendly controls, and air purification capabilities make it a top choice for those seeking comfort and efficiency in their homes.