Gain Controls

Adjusting Amplifier Controls cont.

Crossover Control

Where you set the crossover is very subjective and can be fine tuned to match your listening preference or speaker requirement. If the amplifier is driving small speakers (crossover set to HI PASS) this will eliminate the low frequencies from damaging the high frequency speaker. If the amplifier is driving subwoofers (crossover set to LO PASS). These are only guidelines because setting the right frequency depends on the listeners preferences. What sounds good to one may not sound good to another. The following guidelines should give you a good understand- ing for working with our amplifiers.

HI PASS

When using the amplifier to drive high and midrange speakers you will need to set the switch to HI PASS. This activates the 12dB@80Hz high pass crossover and filters out low frequencies.

LO PASS

When using the amplifier to drive woofers the switch will need to be set to LO PASS. This activates the 12 dB @80Hz low pass crossover and filters out upper frequencies.

Bass Boost

The BASS BOOST control is designed to give you increased output at 40 Hz. The setting for this control is subjec- tive, however, if you turn it up, you must go back and adjust the gain control to avoid clipping the amplifier.

Depending on the limits of the system or the limits of the woofers the BassBoost Control will give your system that extra kick. It will provide up to 12 dB of boost @ 40 Hz, which will more than make your system POUND!

Remember, the gain control is not a volume control, it matches the output of the head unit to the input level of the amplifier and must be adjusted properly for best performance. All the way up or down is not necessarily the best. Turn the head unit up to about 3/4 volume. (eg. If the head unit goes to 30, turn it to 25.) Next, turn (clock- wise) the gain on the amplifier up slowly until you can hear audible distortion, then turn it down just a little. Adjust AMP 1 first, then proceed to AMP 2 if applicable. AMP 2 should be adjusted with the same process. If using the amplifier to power subwoofers and the Bass Boost is adjusted, the gain must be re-adjusted to insure the amplifier is not clipping.

KX100.2 & KX200.4 Technical Manual

Version 2.0

Page 10

KX200.4 specifications

The Kicker KX200.4 is a powerful and versatile four-channel amplifier designed for car audio enthusiasts seeking high-quality sound and robust performance. Known for its remarkable efficiency and compact size, the KX200.4 not only fits perfectly into tight installation spaces but also delivers a significant punch, making it an ideal choice for both beginners and seasoned audiophiles.

One of the standout features of the KX200.4 is its maximum power rating of 200 watts RMS, with each channel capable of outputting 50 watts. This power output allows users to drive a wide range of speakers with clarity and accuracy. Additionally, the amplifier's ability to bridge channels opens up further options for configuration, enabling users to boost power to subwoofers or larger speakers.

The KX200.4 incorporates advanced Kicker technologies, including a Class D design that enhances efficiency while bringing down heat generation. This means that the amplifier can operate effectively even during prolonged use without the risk of overheating, promoting longevity and reliability. Furthermore, a variable crossover feature allows users to tailor the frequency output according to their specific speaker setup, ensuring that each speaker receives the appropriate range of sound.

Another significant characteristic of the KX200.4 is its compact and lightweight design. Weighing in at just 5.9 pounds and measuring 10.75 inches by 7.25 inches by 2 inches, this amplifier can fit into most vehicles without any hassle. The sleek and unobtrusive design is not only functional but also aesthetically pleasing, making it a great addition to any car audio system.

The KX200.4 also features a bass boost functionality, allowing users to enhance low frequencies for a more impactful and immersive listening experience. This added control over sound output helps to fine-tune the audio to personal preferences, ensuring listeners get the most out of their music.

Overall, the Kicker KX200.4 delivers outstanding performance, advanced features, and a flexible design that appeals to a wide range of users. Whether for casual listening or high-energy music playback, this amplifier provides the power and clarity necessary to enjoy every note to the fullest. Combining quality construction with innovative technology, the KX200.4 stands out as a top choice in the competitive world of car audio amplification.