Kicker KX200.4 technical manual Fuse Ratings, Adjusting Amplifier Controls

Page 9

Fuse Ratings

 

Model

Fuse Size

Wire Size

 

 

 

 

 

KX75.2

15A

8 GA

KX150.4

30A

8 GA

Specifications subject to change without prior notice.

Adjusting Amplifier Controls

On your Kicker amplifier there are rotary controls and switches on the end panel. These controls ensure the relia- bility and performance of the amplifier, so they need to be set correctly. If you are using a KX150.4 you will have two sets of rotary controls and switches. One set controls AMP1 and one set controls AMP2.

BEFORE TURNING ON THE SYSTEM FOR THE FIRST TIME, MAKE SURE THAT

THE ROTARY CONTROLS ON THE SIDE OF THE AMPLIFIER ARE

TURNED FULLY COUNTER-CLOCKWISE!

KX 100.2

KX 200.4

CROSSOVER SWITCHES

NEVER CHANGE THE CROSSOVER SWITCH SETTING WITH THE SYSTEM ON!

The switches located on the end panel next to the RCA jacks are for setting the internal crossover. In the OFF position the amplifier passes a full range signal to the speakers. Use the LO PASS position when connected to a subwoofer. The HI PASS position should be selected when connected to any speakers which you do not want to receive sub-bass information.

KX100.2 & KX200.4 Technical Manual

Version 2.0

Page 9

Image 9
Contents KX100.2 & KX200.4 Tech- nical Manual Features Model KX100.2 KX200.4 RMS Power SpecificationsRemove Mounting InstructionsKX100.2 Wiring Wiring InstructionsKX200.4 Wiring RCA Dummy Plugs Source Factory Wiring Amplifier Fuse Ratings Adjusting Amplifier ControlsGain Controls Battery System DiagramsGround Remote TURN-ON Ground Remote TURN-ON KX200.4 4 Channel Stereo Mode KX200.4 3 Channel Stereo Mode KX200.4 2 Channel Mono Mode Ohm’s Law = I X R FormulasPower Wire Chart Power Cable CalculationEletronics Limited Warranty

KX200.4 specifications

The Kicker KX200.4 is a powerful and versatile four-channel amplifier designed for car audio enthusiasts seeking high-quality sound and robust performance. Known for its remarkable efficiency and compact size, the KX200.4 not only fits perfectly into tight installation spaces but also delivers a significant punch, making it an ideal choice for both beginners and seasoned audiophiles.

One of the standout features of the KX200.4 is its maximum power rating of 200 watts RMS, with each channel capable of outputting 50 watts. This power output allows users to drive a wide range of speakers with clarity and accuracy. Additionally, the amplifier's ability to bridge channels opens up further options for configuration, enabling users to boost power to subwoofers or larger speakers.

The KX200.4 incorporates advanced Kicker technologies, including a Class D design that enhances efficiency while bringing down heat generation. This means that the amplifier can operate effectively even during prolonged use without the risk of overheating, promoting longevity and reliability. Furthermore, a variable crossover feature allows users to tailor the frequency output according to their specific speaker setup, ensuring that each speaker receives the appropriate range of sound.

Another significant characteristic of the KX200.4 is its compact and lightweight design. Weighing in at just 5.9 pounds and measuring 10.75 inches by 7.25 inches by 2 inches, this amplifier can fit into most vehicles without any hassle. The sleek and unobtrusive design is not only functional but also aesthetically pleasing, making it a great addition to any car audio system.

The KX200.4 also features a bass boost functionality, allowing users to enhance low frequencies for a more impactful and immersive listening experience. This added control over sound output helps to fine-tune the audio to personal preferences, ensuring listeners get the most out of their music.

Overall, the Kicker KX200.4 delivers outstanding performance, advanced features, and a flexible design that appeals to a wide range of users. Whether for casual listening or high-energy music playback, this amplifier provides the power and clarity necessary to enjoy every note to the fullest. Combining quality construction with innovative technology, the KX200.4 stands out as a top choice in the competitive world of car audio amplification.