Whirlpool CA10WXP0 manual Location Requirements, Electrical Requirements, Window installation

Page 4

Location Requirements

IMPORTANT: Observe all governing codes and ordinances.

Check the location where the air conditioner will be installed. Proper installation is your responsibility. Make sure you have everything necessary for correct installation.

The location should provide:

■Grounded electrical outlet within 4 ft (122 cm) of where the power cord exits the air conditioner.

NOTE: Do not use an extension cord.

■Free movement of air to rooms to be cooled.

■A large enough opening for the air conditioner. Installation parts are supplied for double-hung windows.

■Adequate wall support for weight of air conditioner. Air conditioner weighs 56 lbs (25 kg) to 80 lbs (36 kg).

NOTE: Cabinet louvers must not be obstructed. Air must be able to pass freely through the cabinet louvers.

1

1. Cabinet louvers

Window installation

Window opening measurements:

■26 in. (66 cm) minimum to 38 in. (95.5 cm) maximum opening width.

■16 in. (40.6 cm) minimum opening height.

A

B

A. 26 in. (66 cm) minimum

B. 16 in. (40.6 cm) minimum

Electrical Requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

In the U.S. only: If codes permit and a separate ground wire is used, it is recommended that a qualified electrician determine that the ground path is adequate.

Check with a qualified electrician if you are not sure air conditioner is grounded.

Athree-wire, single-phase, 60-Hz, AC-only, electrical supply is required on a separate circuit. A 15-amp time-delay fuse or circuit breaker is required. Copper wire (14 gauge) is required.

The fuse size must not exceed the circuit rating specified on the model and serial number label. The model and serial number label is located on the right-hand side of the cabinet.

Specific electrical requirements are listed in the chart. Follow the requirements for the type of plug on the power supply cord.

Power supply cord

Wiring requirements

plug outlet

 

 

■ 115 volt (103.5 min. -

 

126.5 max.)

 

■ 0-12 amperes

 

■ 15-amp time-delay fuse or

 

circuit breaker

 

■ 14 gauge copper wiring

Recommended ground method

For your personal safety, this air conditioner must be grounded. This air conditioner is equipped with a power supply cord having a grounded 3 prong plug. To minimize possible shock hazard, the cord must be plugged into a mating, grounded 3 prong outlet, grounded in accordance with all local codes and ordinances. If a mating outlet is not available, it is the customer's responsibility to have a properly grounded 3 prong outlet installed by a qualified electrical installer.

It is the customer's responsibility:

■To contact a qualified electrical installer.

■To assure that the electrical installation is adequate and in conformance with National Electrical Code, ANSI/NFPA 70 - latest edition, and all local codes and ordinances.

Copies of the standards listed may be obtained from:

National Fire Protection Association One Batterymarch Park

Quincy, Massachusetts 02269

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents AIR Conditioner Acondicionador DE AireUse & Care Guide Manual de Uso y CuidadoTable of Contents ÍndiceAIR Conditioner Safety Installation RequirementsTools and Parts Parts suppliedWindow installation Location RequirementsElectrical Requirements Recommended ground methodInstallation Instructions Prepare Air Conditioner for InstallationInstall side curtains Unpack the Air ConditionerPosition the Air Conditioner Attach side curtains to windowComplete Installation Top viewAIR Conditioner USE Starting Your Air Conditioner Digital ControlTimer delay To clear Timer delay programTo operate air conditioner with remote control To select the modeTo select the fan speed in Cool or Power Saver mode only To raise the temperatureTo lower the temperature Starting Your Air Conditioner Rotary ControlChanging Air Direction Normal SoundsCleaning the Air Filter Cleaning the Front PanelAnnual Maintenance AIR Conditioner CareTroubleshooting Accessories Assistance or ServiceU.S.A Seguridad DEL Acondicionador DE Aire Requisitos DE InstalaciónHerramientas y piezas Piezas suministradasRequisitos para la ubicación Requisitos eléctricosInstalación en la ventana Método recomendado para la puesta a tierraInstrucciones DE Instalación Desempaque el acondicionadorDe aire Prepare el acondicionador de aire Para la instalaciónColocación del acondicionador De aire Complete la instalación Fije las cortinas laterales a la ventanaMode Modo Cómo Usar SU Acondicionador DE AireFan Speed Velocidad de ventilación TemperaturaPara cambiar la pantalla de la temperatura de F a C Para ver el tiempo restante en horasPara encender o apagar el acondicionador de aire Para seleccionar el modoPara subir la temperatura Para bajar la temperaturaControl de respiradero en algunos modelos Apague el acondicionador de aireCómo cambiar la dirección del aire Sonidos normalesSolución DE Problemas Cómo Cuidar SU Acondicionador DE AireParece que el acondicionador de aire funciona excesivamente Se filtra agua del gabinete a su casaEn los EE.UU Ayuda O Servicio TécnicoAccesorios 1187768

CA10WXP0 specifications

The Whirlpool CA10WXP0 is an exceptional air conditioner that combines advanced technology and sleek design to provide efficient cooling solutions for any home environment. This portable air conditioning unit is perfect for those who need a flexible and powerful way to maintain comfortable temperatures without the constraints of a traditional window unit.

One of the standout features of the Whirlpool CA10WXP0 is its powerful cooling capacity. With a cooling range suitable for spaces up to 400 square feet, this unit is designed to quickly and effectively lower room temperatures, making it ideal for living rooms, bedrooms, and even small office spaces. The unit's adjustable fan speeds allow users to customize the airflow to their preference, ensuring comfort at all times.

In terms of technology, the Whirlpool CA10WXP0 is equipped with a user-friendly digital control panel. This intuitive interface provides easy access to the unit’s various settings, including temperature selection and mode adjustments. The remote control feature adds extra convenience, allowing users to adjust the settings from across the room without needing to get up.

Energy efficiency is another key characteristic of the Whirlpool CA10WXP0. The unit is designed to consume less energy while delivering optimal cooling performance. With its Energy Saver Mode, the air conditioner can automatically adjust cooling levels based on the ambient temperature, helping to reduce electricity bills and decrease environmental impact.

Additionally, the CA10WXP0 comes with a built-in dehumidifier function, which effectively removes excess moisture from the air. This dual functionality not only helps enhance overall comfort but also promotes better air quality, making it invaluable for those with allergies or respiratory issues.

The sleek, portable design of the Whirlpool CA10WXP0 ensures that it can be easily moved from room to room. With smooth-rolling caster wheels, the unit can be repositioned with minimal effort, allowing users to enjoy cool air wherever they need it most.

Overall, the Whirlpool CA10WXP0 stands out in the portable air conditioning market due to its powerful performance, efficient energy use, and convenience features. Whether you need to cool down a small space during the hot summer months or want added comfort year-round, this air conditioner is a reliable and effective choice for any home.
Top Page Image Contents