Whirlpool CA10WXP0 manual AIR Conditioner USE, Starting Your Air Conditioner Digital Control

Page 8

AIR CONDITIONER USE

Operating your air conditioner properly helps you to obtain the best possible results.

This section explains proper air conditioner operation.

IMPORTANT:

■If you turn off the air conditioner, wait at least 3 minutes before turning it back on. This prevents the air conditioner from blowing a fuse or tripping a circuit breaker.

■Do not try to operate your air conditioner in the cooling mode when outside temperature is below 65°F (18°C). The inside evaporator coil will freeze up, and the air conditioner will not operate properly.

NOTE: In the event of a power failure, your air conditioner will operate at the previous settings when the power is restored.

Starting Your Air Conditioner—

Digital Control

1.Remove clear protective film from control panel and front panel badge.

2.Press POWER to turn on air conditioner.

2.Choose AUTO, COOL, FAN ONLY or POWER SAVER.

■Auto - Cools room while it automatically controls fan speed. You cannot change fan speed, but you can adjust temperature by pressing the plus or minus button.

■Cool - Cools room. You can select fan speed by pressing Fan Speed. You can then adjust temperature by pressing the plus or minus button.

■Fan Only - Only the fan runs. Display shows “FO” (fan only).

NOTE: Fan runs on Turbo speed only.

■Power Saver - Fan runs only when cooling is needed. Fan stops running when the room temperature matches the Temperature control setting.

Because the fan does not circulate the room air continuously, less energy is used, but the room air is not circulated as often. Use Power Saver when you are asleep or away from home.

Fan Speed

NOTE: The Fan Speed button will operate only when Cool or Power Saver mode has been selected.

1.Press FAN SPEED until you see the indicator light come on for the setting you desire.

2.Choose TURBO, HIGH or LOW.

NOTE: When air conditioner is turned on for the first time

after it is plugged in, it will display the default settings: Cool mode, Turbo fan speed, 72°F (22°C). When it is turned on at all other times, it will display the previous settings.

3.Select mode. See “Mode.”

4.Select fan speed. See “Fan Speed.”

5.Set temperature. See “Temperature.”

Mode

1.Press MODE until you see the indicator light come on for the setting you desire.

Temperature

■Press the plus button to raise the temperature 1º until it reaches 86°F (30°C).

■Press the minus button to lower the temperature 1º until it reaches 64°F (18°C).

To change the temperature display from °F to °C:

1.Turn off the air conditioner.

2.While the air conditioner is off, press and hold down the MODE and FAN SPEED buttons while pressing POWER to turn the air conditioner on.

NOTE: Follow these same steps to change the temperature display from °C to °F.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents AIR Conditioner Acondicionador DE AireUse & Care Guide Manual de Uso y CuidadoTable of Contents ÍndiceAIR Conditioner Safety Installation RequirementsTools and Parts Parts suppliedWindow installation Location RequirementsElectrical Requirements Recommended ground methodInstallation Instructions Prepare Air Conditioner for InstallationInstall side curtains Unpack the Air ConditionerPosition the Air Conditioner Attach side curtains to windowComplete Installation Top viewAIR Conditioner USE Starting Your Air Conditioner Digital ControlTimer delay To clear Timer delay programTo operate air conditioner with remote control To select the modeTo select the fan speed in Cool or Power Saver mode only To raise the temperatureTo lower the temperature Starting Your Air Conditioner Rotary ControlChanging Air Direction Normal SoundsCleaning the Air Filter Cleaning the Front PanelAnnual Maintenance AIR Conditioner CareTroubleshooting U.S.A Assistance or ServiceAccessories Seguridad DEL Acondicionador DE Aire Requisitos DE InstalaciónHerramientas y piezas Piezas suministradasRequisitos para la ubicación Requisitos eléctricosInstalación en la ventana Método recomendado para la puesta a tierraInstrucciones DE Instalación Desempaque el acondicionadorDe aire Prepare el acondicionador de aire Para la instalaciónColocación del acondicionador De aire Complete la instalación Fije las cortinas laterales a la ventanaMode Modo Cómo Usar SU Acondicionador DE AireFan Speed Velocidad de ventilación TemperaturaPara cambiar la pantalla de la temperatura de F a C Para ver el tiempo restante en horasPara encender o apagar el acondicionador de aire Para seleccionar el modoPara subir la temperatura Para bajar la temperaturaControl de respiradero en algunos modelos Apague el acondicionador de aireCómo cambiar la dirección del aire Sonidos normalesSolución DE Problemas Cómo Cuidar SU Acondicionador DE AireParece que el acondicionador de aire funciona excesivamente Se filtra agua del gabinete a su casaAccesorios Ayuda O Servicio TécnicoEn los EE.UU 1187768

CA10WXP0 specifications

The Whirlpool CA10WXP0 is an exceptional air conditioner that combines advanced technology and sleek design to provide efficient cooling solutions for any home environment. This portable air conditioning unit is perfect for those who need a flexible and powerful way to maintain comfortable temperatures without the constraints of a traditional window unit.

One of the standout features of the Whirlpool CA10WXP0 is its powerful cooling capacity. With a cooling range suitable for spaces up to 400 square feet, this unit is designed to quickly and effectively lower room temperatures, making it ideal for living rooms, bedrooms, and even small office spaces. The unit's adjustable fan speeds allow users to customize the airflow to their preference, ensuring comfort at all times.

In terms of technology, the Whirlpool CA10WXP0 is equipped with a user-friendly digital control panel. This intuitive interface provides easy access to the unit’s various settings, including temperature selection and mode adjustments. The remote control feature adds extra convenience, allowing users to adjust the settings from across the room without needing to get up.

Energy efficiency is another key characteristic of the Whirlpool CA10WXP0. The unit is designed to consume less energy while delivering optimal cooling performance. With its Energy Saver Mode, the air conditioner can automatically adjust cooling levels based on the ambient temperature, helping to reduce electricity bills and decrease environmental impact.

Additionally, the CA10WXP0 comes with a built-in dehumidifier function, which effectively removes excess moisture from the air. This dual functionality not only helps enhance overall comfort but also promotes better air quality, making it invaluable for those with allergies or respiratory issues.

The sleek, portable design of the Whirlpool CA10WXP0 ensures that it can be easily moved from room to room. With smooth-rolling caster wheels, the unit can be repositioned with minimal effort, allowing users to enjoy cool air wherever they need it most.

Overall, the Whirlpool CA10WXP0 stands out in the portable air conditioning market due to its powerful performance, efficient energy use, and convenience features. Whether you need to cool down a small space during the hot summer months or want added comfort year-round, this air conditioner is a reliable and effective choice for any home.
Top Page Image Contents