Whirlpool 1185020 manual FAN Speed, Dryness Control, If your control looks like a or B

OperatingSafetyinformationdehumidifier 5

Note: Before turning dehumidifier on, be sure that:

•Dehumidifier is plugged into the wall outlet

•Bucket is properly inserted into dehumidifier

•Bucket is empty

indicates the bucket is full

OR

the bucket is not in position

Control A

EMPTY/ADJUST

BUCKET

NORMA L

D

R

Y

E

S

T

OFF CONTINUOUS

DRYNESS CONTROL

adjusts humidity removal set point (amount of moisture removed from room)

indicates the bucket is full

OR

the bucket is not in position

Control B

HIGH	EMPTY/ADJUST
	BUCKET

LOW

FAN SPEED

NORMA L

D

R

Y

E

S

T

OFF CONTINUOUS

DRYNESS CONTROL

adjusts humidity removal set point (amount of moisture removed from room)

selects fan speed

If your control looks like A or B:

TO TURN DEHUMIDIFIER ON:

Turn DRYNESS CONTROL clockwise.

FAN SPEED:

(Models with Control B only): This controls fan operation. Use desired setting.

HIGH - for faster moisture removal. LOW - for slower moisture removal.

DRYNESS CONTROL:

This controls the amount of moisture in the room. Turn control knob clockwise for more drying. Turn control knob counterclockwise for less drying. Turn control knob to “NORMAL” to maintain average humidity conditions.

NOTE: For the first few days of use, turn the DRYNESS CONTROL clockwise to “DRYEST” to remove extra moisture from the furnishings as well as the room air.

EMPTY/ADJUST BUCKET light:

If this light is on, the dehumidifier is not running. This light indicates that you need to check:

•If the bucket is full, empty bucket and replace.

•If the bucket is not in position, remove bucket and replace. Make sure the bucket fits all the way into the dehumidifier and the light is off,

or dehumidifier will not run.

TO TURN DEHUMIDIFIER OFF:

Turn DRYNESS CONTROL counterclockwise to OFF.