Audiovox XR9000 owner manual 128-7863

Page 1

Model XR9000

Owner’s Manual

Long Range Remote Start Security System With Plug-In Shock Sensor & Starter Disable

IMPORTANT ! In order to provide you with the highest level of security to your vehicle, this system is equipped with selectable manual override circuitry. It is possible that you will need to override you security system if the transmitter becomes lost, or inoperative due to battery failure. Reading the sections on "Manually Overriding Your System" is necessary to fully understand the procedure required to enable your vehicle in such situations. In addition, the chart on the last page of this manual has a section for the particular features and options installed in your vehicle as well as the override method selected. Although the default mode is "Valet Switch" operation, the system can be configured for "Custom Code" operation for enhanced security. Confirm the override mode selected on the last page of this manual, and familiarize yourself with the section on it's opera- tion.

FEATURES :

1 Two Way 6 Button LCD Remote Control & 1 One Way 5 Button Remote Control

Seven Channel Code Learning Programmable Receiver External Superheterodyne Transceiver Antenna

Single Or Two User Programmable W/Separate Control Outputs Single Button Lock/Unlock or Separate Button Lock/Unlock or Both Remote Keyless Entry With Optional Access Guard (must have power door locks)

Selectable Manual Override Mode

New Enhanced Panic Feature (Any button other than unlock stops siren, no change to the units state)

Smart Disarm (If triggered, elect to shut off siren, or disarm entire unit ) Adjustable Shock Sensor Via The Transmitter (Pre-Detect Off, Pre & Full Detect Off, City Mode)

Safe Start Output Controlled From Channel 3 (Option Channel 3 For Trunk, Or For R/S)

24 Hour Time Start Mode Cold Temperature Start Mode

2 or 4 Hour Automatic Start Mode

Parking Meter Count Down Timer On LCD Remote Additional Count Down Timer Mode

Remote Panic In All Modes (Press & Hold Lock /Unlock Button For 3 Seconds To Engage)

Improved Custom Code Override, User Selectable and Programmable Protected PBLED, (Push Button LED Valet/Program/Manual Override Switch ) 7-Function LED-Arm / Disarm / Zone 1 / Zone 2 / Zone 3 / Valet / Arming Intrusion Alert With Memory

Instant Siren Activation

Starter Disable Output

128-7863

1 of 20

Image 1
Contents 128-7863 Your Code Hopping Transmitters OptionsArming the System Active Protection While the System is Armed Arming the System Passive AutomaticDisarming the System 128-7863 PUSH-BUTTON LED/VALET/OVERRIDE/PROGRAMMING Switch Pbled Intrusion Warning SignalsWhile the System is Sounding Custom Code Programming Example Remote Panic Operation Eliminating the Normal ARM/DISARM ChirpsRF Shock Sensor Mode Selection Remote Starting the Vehicle Pbled Safety Control SwitchTo Begin the Automatic Start UP Timer Operating on Automatic Start UP Timer ModeCanceling Theautomatic Start UP Timer Additional Remote Function ChannelTurbo Timer Mode Transceiver Iconsand Their Indications TelematicupgradeAdditional Icons That MAY be Displayedare Ter will chirp 1 time, and the display will clear Additional Remote Features Timing Count Down 128-7863 128-7863 Siren Chirp Indicators Dash LED IndicatorsParking Lamp Indicators