Bosch Appliances LBB 4172 user manual Working with interpreter configuration files

DCN Next Generation Simultaneous Interpretation

en 13

A tick mark √ indicates that this setting is enabled. It is possible to fill unused interpretation channels with the floor signal. To do so:

•Select the ‘Floor distribution’ option from the ‘Settings’ menu.

A tick mark √indicates that this setting is enabled.

The speak slowly signaling setting is to select if the speak slowly signal is routed to the data distribution board. To do so:

•Select the ‘Speak slowly signaling’ option from the ‘Settings’ menu.

A tick mark √ indicates that this setting is enabled. The help signaling setting is to select if the help signal is routed to the data distribution board. To do so:

•Select the ‘Help signaling’ option from the ‘Settings’ menu.

A tick mark √ indicates that this setting is enabled.

3.5 Working with interpreter configuration files

All options available for interpreter configuration files are contained in the ‘File’ menu. This menu has commands for:

•Opening a new interpreter configuration file.

•Opening an existing interpreter configuration file.

•Saving an interpreter configuration file under its current name.

•Saving an interpreter configuration file under a different name.

•Deleting an interpreter configuration file.

•Printing an interpreter configuration file.

•Exiting the Simultaneous Interpretation program.

i Note

Exiting the Simultaneous Interpretation program is not covered in this paragraph, but under ‘Exiting Simultaneous Interpretation’ in paragraph 4.2

Creating a new interpreter configuration file To open a new interpreter configuration file:

•Select the ‘File’ menu and click on ‘New...’. The following dialogue box appears:

Figure 13 The ‘New’ dialogue box.

This dialogue box contains a text box for entering the interpreter configuration file name. When the ‘New’ dialogue box opens, a text insertion point is already in the text box and you can type a name up to 12 characters long.

•Type the desired interpreter configuration file name in the text box.

•Click on the ‘Ok’ push button.

If a valid file name has been entered, a new interpreter configuration file opens and the name appears in the title bar at the top of the window.

If you have requested to open a new interpreter configuration file before saving changes to the current interpreter configuration file, a warning message with the following text is displayed:

‘Changes have been made to <filename>.’ ‘Do you want to save?’

•Click on the ‘Yes’ push button to save the changed interpreter configuration file and open the new interpreter configuration file.

•Click on the ‘No’ push button to open the new interpreter configuration file without saving the changed interpreter configuration file.

•Click on the ‘Cancel’ push button to leave the ‘New’ dialogue box without opening a new interpreter configuration file.

If you have typed a filename that already exists, a warning message with the following text is displayed:

‘A file already exists with this name’

•Click on the ‘Ok’ push button.

The dialogue box returns and another name can be typed in.

Opening an existing interpreter configuration file To open an existing interpreter configuration file:

•Select the ‘File’ menu and click on ‘Open...’. The following dialogue box appears:

Bosch Security Systems B.V. 2005 September 9922 141 70363