Description, Models | Bosch Appliances tc9346a guide

2.0 DESCRIPTION

Environmental enclosures in the TC9346A Series are used with pan/tilt units or fixed mounts.

The enclosures are constructed of aluminum.

You can install cameras with either fixed focal length lenses or motorized zoom lenses. All models have an adjustable camera sled to accommodate different sizes of cameras and lenses.

2.1 MODELS

TC9346A	Environmental enclosure with rear-opening lid. Lid has gas
	spring to hold it open. 29-inch (73.66 cm) length.
TC9346A-1	TC9346A with 120 VAC thermostatically controlled heater and
	blower.
TC9346A-2	TC9346A with 24 VAC thermostatically controlled heater and
	blower.
TC9346A-3	TC9346A with 230 VAC thermostatically controlled heater and
	blower.

2.2 OPTIONAL ACCESSORIES

You can order the following optional accessories for the TC9346A Series en- closures:

BK57-1*	Blower kit, 120 VAC, 15 watts
BK57-2*	Blower kit, 24 VAC, 10 watts
BK57-3*	Blower kit, 230 VAC, 15 watts
HK57-1*	Heater kit, 120 VAC, 90 watts
HK57-2*	Heater kit, 24 VAC, 50 watts
HK57-3*	Heater kit, 230 VAC, 70 watts
O/I-PCB	Circuit board with thermostats
O/I-LPP*	Preset position lens wire harness (must be used with O/I-PCB)
O/I OUTLET*	120 VAC electrical outlet (must be used with O/I-PCB)
SS5729	Sun shroud
TI57	Thermal insulation kit
WD57-1*	Window defroster and defogger kit, 120 VAC, 30 watts
WD57-3*	Window defroster and defogger kit, 230 VAC, 30 watts
WD57-2*	Window defroster and defogger kit, 24 VAC, 30 watts
WW5729-1**	Window wiper kit, 120 VAC, 15 watts
WW5729-2**	Window wiper kit, 24 VAC, 15 watts
WW5729-3**	Window wiper kit, 230 VAC, 15 watts

*These accessories are factory wired with a plug-in connector for use with the O/I-PCB. The O/I-PCB is included with all -1/-2/-3 models. You must order one O/I-PCB if you are using a basic enclosure (TC9346A) with these optional accessories.

**Factory installed option only; consult factory for availability.