Bosch Appliances 5000, 7000 installation manual Day/Night switching Dinion capture

32 en Configuration DINION capture 5000/7000

4.Mode 4

Default settings.

5.Mode 5

Default settings.

6.Mode 6

Default settings.

NOTICE!

In the overview camera, mode names by default are called Mode 1, Mode 2, etc.

4.3Day/Night switching (DINION capture 7000)

The overview camera is equipped with a motorized IR filter. The mechanical IR filter can be removed in low-light or IR illuminated applications by software configuration settings.

If Auto switching mode is selected, the camera automatically switches the filter depending on the observed light level. The switching level is programmable. In Auto switching mode the camera prioritizes motion (the camera gives sharp images without motion blur as long as the light level permits) or color (the camera gives color pictures as long as the light level permits). The camera recognizes IR illuminated scenes to prevent unwanted switching to color mode.

There are four different methods of controlling the IR filter:

–via an alarm input,

–via Bilinx communication,

–automatically, based on the observed light levels, or

–as part of the programmable mode profile.

1.0 2012.01 Installation Manual Bosch Security Systems, Inc.