APC NBPD0155 installation manual Rear, Right port out

Rear

	Item	Description
	Sensor ports	Used for connecting APC sensors, third-party dry contact sensors, and
		standard third-party 0-5 V sensors. (See “Additional options” on
		page 3 for details on APC sensor options.)
		Third-party dry contact sensors require the NetBotz Dry Contact Cable
		(NBES0304). Standard third-party 0-5 V sensors require the
		NetBotz 0-5 V Sensor Cable (NBES0305).
	A-Link ports	Used for connecting the NetBotz 155 to a NetBotz Rack Monitor 450,
	• Left port in	NetBotz Room Monitor 455, or NetBotz Rack Monitor 550. Standard
	• Right port out	CAT-5 cabling with straight-through wiring is required. Depending on
		the appliance to which the NetBotz 155 is connected, multiple devices
		may be cascaded along an A-Link bus.
	24 VDC input	Provides supplemental power for high-current load configurations.
		Supplemental power is not required for most system configurations.
		See the installation and quick configuration manual included with your
		appliance to determine whether supplemental power is required.

NetBotz Room Sensor Pod 155 Installation Manual 5