BEA Falcon Manual and Motion Sensor Settings

Page 7

During the manual adjustment session:

Each press on the right button increases the number of the displayed parameter by one unit;

Each press on the left button increases the value of the displayed parameter by one unit.

NOTE: When the maximum value or the highest number of the parameter is reached, this will return to their minimum values.

Parameter

Parameter

Values

Factory setting

Number

 

 

 

 

 

 

 

1

Sensitivity

0 - 9

7

2

Hold time

0 - 9

0

3

Relay configuration

1 - 4

1

4

Detection mode

1 - 3

2

5

Pedestrian

1 - 5

1

 

rejection mode

 

 

For example, to change the sensitivity from 7 to 9 and the rejection mode from ‘detection of all kind of targets in motion’ to High ‘Pedestrian/parallel traffic’ rejection.

Press any button for 2 seconds to enter the adjustment session and then release it.

The red LED flashes once (parameter 1 = sensitivity) and the green LED flashes 7 times (sensitivity=7).

Press the left button twice to increase the sensitivity from 7 to 9.

The red LED still flashes once (parameter 1 = sensitivity) but the green LED flashes 9 times now (sensitivity=9).

Now press the right button 4 times to move to function 5 (rejection mode) ;

The red LED flashes 5 times (parameter 5 = rejection mode) and the green LED flashes once (‘detection of all kind of targets in motion’) ;

Press the left button 4 times to set the parameter to High ‘Pedestrian/parallel traffic’ rejection.

The red LED still flashes 5 times (parameter 5 = rejection mode) but the green LED flashes 5 times now (High ’Pedestrian/parallel traffic’ rejection).

Press any button during 2 seconds to end the adjustment session and then release it.

 

 

 

 

 

 

TROUBLE-

 

SYMPTOM

PROBABLE CAUSE

 

CORRECTIVE ACTION

SHOOTING

 

The door will not open and the red

The sensor power is off.

 

Check power supply.

 

 

LED does not light up.

 

 

Check the supply voltage.

 

 

 

 

 

 

The door opens and closes

The sensor ‘sees’ the door

 

Increase the tilt angle and/or reduce

 

 

constantly.

moving.

 

the sensitivity.

 

 

 

When closing the door creates

 

Ensure that the sensor is correctly

 

 

 

vibrations picked up by the

 

fixed.

 

 

 

sensor.

 

If the rejection mode is set at level 1,

 

 

 

 

 

set this parameter to level 2.

 

 

 

 

 

Reduce the sensitivity.

 

 

 

 

 

Switch to unidirectional mode.

 

 

The door opens and closes after a

The sensor is picking up

 

Reduce the sensitivity.

 

 

given time for no apparent reason.

unintended traffic motion.

 

Reduce the tilt angle.

 

 

The sensor is not capable of

The tilt angle is too large.

 

Reduce the tilt angle.

 

 

activation near the door.

 

 

 

 

 

The sensor does not respond to the

The batteries are weak.

 

Check the batteries insertion.

 

 

remote control.

 

 

Change the batteries.

 

 

 

The access code has been

 

Press both push buttons

 

 

 

changed.

 

simultaneously to reset all the

 

 

 

 

 

parameters to the factory values.

 

 

 

 

 

Or switch off the power supply.

 

 

 

 

 

Within the first minute after the

 

 

 

 

 

power on, change the access code.

Do not leave problems unresolved. If a satisfactory solution cannot be achieved after troubleshooting a problem, please call BEA, Inc. If you must wait for the following workday to call BEA, leave the door inoperable until satisfactory repairs can be made. Never sacrifice the safe operation of the automatic door or gate for an incomplete solution.

The following numbers can be called 24 hours a day, 7 days a week. For more information, visit www.beasensors.com.

US & Canada: 1-866-249-7937

Midwest: 1-888-308-8843

Northeast: 1-866-836-1863

West: 1-888-419-2564

Southeast: 1-800-407-4545

Canada: 1-866-836-1863

75.5351.02 EN 20080317 (75.5350)

Page 7 of 7

Image 7
Contents 75.5351.02 EN 20080317 Ceiling Mounting Wall Mounting To remove or to insert the cableDuring a detection the red LED lights on Falcon Mounting height 16.5 feetUnlock Description of the Infrared Remote ControlParameter Users Actions Factory KEY Setting LED SignalSensitivity Defaults ValuesHold Time 23 ft 16.5 ft 11.5 ft 10 ft Detection Mode RejectionPress the Detection Mode key Press the Rejection Mode keySymptom Probable Cause Corrective Action

FALCON XL, FALCON specifications

The BEA FALCON and FALCON XL are advanced unmanned aerial vehicles (UAVs) designed to meet a variety of operational needs in both commercial and military sectors. Known for their versatility and cutting-edge technology, these drones have garnered attention for their capabilities in aerial surveillance, reconnaissance, and precision operations.

One of the standout features of the BEA FALCON is its modular design, which allows operators to easily swap out payloads depending on the mission requirements. This flexibility enables the UAV to be tailored for applications ranging from environmental monitoring to disaster management and even tactical military operations. The payload capacity of the FALCON makes it an ideal platform for integrating advanced sensors, including high-resolution cameras, LiDAR systems, and electronic warfare equipment.

The FALCON series boasts an impressive range of flight performance, with the FALCON XL offering extended range capabilities. The drone can conduct operations at altitudes typically above commercial air traffic, providing a tactical advantage by conducting missions undetected. The FALCON XL can cover longer distances without the need for frequent refueling, supported by a hybrid propulsion system that combines electric and traditional fuel sources, thereby enhancing its endurance.

In terms of technology, the FALCON is equipped with sophisticated navigation and control systems, utilizing GPS and inertial navigation systems for precise positioning. The drones also feature advanced autopilot capabilities and can be operated remotely or autonomously, providing greater safety and operational efficiency. The user-friendly interface and real-time data transmission capabilities enable seamless mission planning and execution.

Another notable characteristic of the FALCON series is its resilience and durability. Constructed from lightweight, high-strength materials, these UAVs are designed to withstand harsh environmental conditions and minimize susceptibility to damage. This robustness ensures that they can perform consistently in diverse operational environments.

The BEA FALCON and FALCON XL represent significant advancements in drone technology, showcasing an impressive combination of versatility, performance, and durability. With their ability to adapt to various mission profiles, they stand out as crucial tools for organizations and military units seeking to enhance their aerial capabilities in an increasingly complex operational landscape.