Channel Vision P-0921 manual Features

The P-0921provides communication between two different Channel Vision door intercoms and any phone in the house. When a visitor presses the doorbell button the phones in the house will respond with a distinctive ring. The home owner can then speak to the visitor by answering any of the ringing phones in the house.

Features:

!Supports 2 Channel Vision door intercom stations

!Rings the phones and when the doorbell button is pressed

!Integrated door chime contacts for triggering a traditional doorbell

!Programmable auxiliary dry contact closure

!Page output for whole-house paging system

!Can work with or without an active telephone line

!LED status indicators

!Quick and easy installation

Telephone service input/output. Use either the RJ-45 or screw terminals. CHIME 1 and 2 are dry contacts which close whenever the corresponding doorbell button is pressed.

Unlock Door 1 and 2 allows a door strike relay to be triggered when these terminals are shorted by the press of a button.

AUX contact closure can be configured to close when STRIKE 1 is active OR when PAGE is active

	O	T
	C	U
	L	P
	E	N
	T	I
O		T
		U
C	P
L	T
E	U
T	O

TELCO

INPUT

1		1
R
O		IME
O
D		H
		C
2		2
R
O		E
O		M
D		I
		H
	O	C
CHA
	NNEL
PVIRSION
	TM
2-DOOR
	TELE
ENTRY		PHONE
	CONTROLLER

	K		1
	C		OR
	L
	O		O
	N
	U		D
K		2
C		R
O
L		O
N		O
U	D

Model

P-0921

X

U

A

CO / No CO

# / *

Enables operation when no active CO line is present

Selects the activation key (either # or *)

OUTPUT

DOOR 1	PAGE	DOOR 2
		POWER

Audio page output for whole-house paging systems

Door 1 and 2 are connections for Channel Vision Door stations.Use either RJ-45 or screw terminal connections.

2