Channel Vision P-0921 manual Basic Setup & Operation, Simple push button optional, Telephones

Basic Setup & Operation

When the button is pressed on the door-intercom, the phones in the house will ring. If a doorbell chime and transformer are connected to the CHIME contact, the doorbell chime will also be heard.

If the phone is answered within 20 seconds, it will be automatically connected to the door-intercom. If the phone is answered after 20 seconds simply press ## (or **) to be connected.

(Note: the activation key is determined by the switch labeled “# or *”)

While speaking to the door-intercom, the STRIKE 1 contact can be activated by pressing #71 (or *71).

The Unlock Door terminals can be momentarily shorted with a simple push button which will activate the strike without the use of a telephone.

To send a whole-house page from any phone, press #5 (or*5). (see the following page for a full list of user codes).

		Doorbell			Simple push button (optional)
		Chime
Telephone		and
Service	Transformer
					Strike
					power
					supply
TELCO INPUT	DOOR 1	CHIME 1		UNLOCK DOOR 1	AUX
TELCO OUTPUT	DOOR 2	CHIME 2		UNLOCK DOOR 2	CO / No CO
					# / *
	PROVISION
					P-0921
	CHANNEL				Model
		TM
TELCO
	2-DOOR TELEPHONE
	ENTRY CONTROLLER				To Strike
INPUT					Mechanism
OUTPUT	DOOR	PAGE	DOOR 2		POWER

To Whole-House

Paging System

House	Channel Vision Compatible
4	Door Intercom Station
Telephones