SVAT Electronics 2CV500 - 4CH PTZ Control, Motion Detection, PTZ controls look like this

Page 20

MAIN MENU...continued

PTZ Control

To access the PTZ controls of the DVR you will need to use the mouse.

1.Move the mouse cursor to the bottom the screen for Pop Up Menu Bar to display.

2.Select the icon.

The PTZ controls look like this:

Note: To exit the PTZ control center, right click the mouse.

Please review the following controls:

- Direction Keys – move the camera up, down, left, or right

- Zoom In/Zoom Out Keys

PRE: If the PTZ camera supports preset positions this option will allow you to save presets as well as go to one of the saved preset postions. Ex. You can set Preset Number 1 to view a front door, Preset 2 for the camera to zoom in on the front door, Preset 3 to change the angle of the camera to view the hall way by the front door, etc. This will save you from manually changing the position of the camera. A maximum of 128 Preset positions can be set.

Auto: Initiates the cameras auto sequence. This will usually consist of panning from side to side and tilting higher and lower.

MOTION DETECTION

1.Access the Main Menu

2.Select the Motion Setup icon

You can set the DVR to detect motion for one or all of your cameras. When one of the cameras detects motion, the DVR will display an icon on screen indicating motion is detected. The DVR can also be configured to begin recording, make an audible beep, or send you an email notification when motion is detected. The event log will be updated with the motion detection event.

Note: Every time motion is detected an icon will appear, and the camera name from which motion is detected will change from white, to yellow.

CV500 - 4CH

20

 

 

Image 20
Contents V1.0 Need Product Warranty Information Table of Contents Table of Contents Login ActiveX Installation Testing TroubleshootingDigital Zoom Audio Time Search Event List SearchTable of Contents IntroductionWhat is Included FeaturesFeatures Additional Accessories CLEARVU7 LCD MonitorRecord Pause/Step Enter Stop Play Menu Buttons & ConnectionsChannels Rewind Copy Quad Things to Consider Before Installation Adjust cameras to the desired viewing anglesConnecting a USB Mouse Camera InstallationConnecting Additional Devices to the DVR To connect a two wire alarm Connecting a Monitor to the DVR RCA CompositeConnecting Your Alarm System to the DVR Power supply Connecting and Powering on the DVRConnecting Your DVR to the Router Using the Mouse Getting StartedScreen Viewing POP UP Menu BARMain Menu Main menu consists of nine optionsMain Menu To call up the Main MenuVideo Adjust Main MenuCamera Camera TitleDwell Time PTZ SetupDisplay Access the Main Menu Select the Motion Setup icon PTZ ControlMotion Detection PTZ controls look like thisTo SET Motion Detection Motion DetectBuzzer SensitivityRecording Setup ResolutionPPS To Change the Normal Record PPSAlarm Record PPS To Change the Alarm Record PPSAudio Record To record with audioRecord Mode Record QualityTo change the record quality To choose a recording scheduleTo set the schedules Schedule SetupThere are 3 different recording options External Alarm Mode Alarm Display ModeIcon Select the Alarm setup icon To return to the MenuEvent LOG Setup To Setup the Event LogBuzzer Time Setup Video Loss DetectRelay Time Setup To Setup the Relay Time SetupHard Disk Management Setup To Change the Buzzer TimeOverwrite Mode To Set the DVR to Warn You When the HDD is Getting FullHDD Format Setup HDD InformationTo Format the HDD Network SetupTo Setup the Password Protect IP Mode Static vs. Dchp To Change from Static to Dchp AddressesRtsp To Setup your DdnsTo Setup PPPoE Settings To Setup backup Recording To Backup Saved Video FootageBackup Time Record TimeDATE/TIME Setup To Setup the Date and TimeSelect the System setup icon Highlight the area you wish to changeDisplay Setup System TypeKeyboard Lock DVR ID NumberSystem Password Setup Firmware UpgradeLoad Default LanguageDaylight Saving Time Setup Load Setup From USBBackup Setup to USB Live Viewing HDD & USB InformationTo Call up the HDD & USB Information Digital ZoomPlayback Playback ControlsControls are as follows, from left to right Press Stop to exit out of the playback or playback menuPlayback Search by TimeEvent List Search Events are as followsBackup Video Playback How to view backup footage from USBBackup buttons are as follows To backup your file to AVISearch buttons are as follows To search by timeNetwork Guide RequirementsFinding your DVR’s IP Address Preparing Your Computer for Viewing the DVRClick Apply Click OK Network GuideMethod 1 Recommended If this is an option MethodViewing Your DVR on Your Computer Username admin Password admin Log in to the DVR Using Internet ExplorerInstalling the ActiveX controls Select your router make and model from the list of DVRs Viewing Your DVR Outside of Your NetworkFinding Your External IP If YOU Cannot Connect TestingOnce Successful To Configure the DVR to Work with Ddns Ddns Dynamic DNSDDNS.CAMDDNS.COM DYNDNS.ORG requires a DYNDNS.ORG accountDYNDNS.ORG Account Setup Required if using DYNDNS.ORGPassword admin To View DVR Through HostnameNetwork Viewing & Playback This is what the online viewing software will look likeMode Date/TimePreset Pointer Network Viewing & PlaybackDirectional Keys Auto PanAdditional Options To back up saved footageDVR Configuration Options Enabled Web Page PortRtsp Port UsernameAlarm ProviderHostname State3G Mobile Device Port Forwarding Setting UP Port ForwardingIf using the default settings From Your Mobile Device Mobile Troubleshooting3G Mobile Device Port Forwarding Mobile Viewing Installation Guide Mobile Viewer ApplicationSony Ericsson K608i Mobile Viewing Installation GuidePress Yes to begin the installation process Click Ok or Allow to allow the connection Name This is arbitrary and can be named to your likingClick Options Click on Connect Disconnect the BlackBerry device from the computer IPhone and iTouch Viewing SafariBlackBerry Bold On the BlackBerry Open up Media Click Options Click ExploreOnce the software has loaded Press Options Select Site List Click on AddClick Options Click on Connect Troubleshooting Guide Too purple, blue, etc My browser keeps freezingNight vision cameras Any imageDVR Specifications DVR Specifications Camera Specifications Camera Specifications VU301 C ModelUsing the ONE to Four Port Power Supply with Cameras Wiring DiagramWiring Instructions Camera ManualDdns Server example DDNS.DVRLINK.NET Camera Drilling TemplateNetworking Information Camera Drilling Template CV500 4CH Specification Sheets Visit US on the WEB

2CV500 - 4CH specifications

SVAT Electronics has established a reputation for delivering reliable security solutions, and their latest offering, the 2CV500 - 4CH, stands as a testament to their commitment to innovative technology. This compact but powerful surveillance system is designed for both residential and commercial applications, ensuring you can keep an eye on your property at all times.

The SVAT 2CV500 features four channels, allowing users to connect up to four cameras simultaneously. This flexibility enables a comprehensive surveillance setup, covering various angles and critical points of concern. Each channel is equipped to support high-definition video, delivering clear and detailed footage that can be essential for identifying individuals and monitoring activities.

One of the standout features of the 2CV500 is its advanced video compression technology. Utilizing H.264 compression, the device optimizes video storage without sacrificing quality, meaning users can save more footage without the need for constant adjustments. This efficiency is complemented by a substantial internal hard drive capacity, which allows for extended recording periods that are crucial for ongoing security needs.

The setup of the 2CV500 is designed to be user-friendly. The plug-and-play capability simplifies the installation process, ensuring that even those with limited technical expertise can get their surveillance system up and running in no time. Moreover, the system supports remote viewing, enabling users to access their cameras from anywhere via smartphones or tablets. This mobility adds a significant layer of convenience, particularly for business owners or frequent travelers.

In terms of environmental durability, SVAT Electronics has designed the 2CV500 with robust housing, making it suitable for both indoor and outdoor use. Its weather-resistant features protect against harsh elements, ensuring that surveillance is maintained regardless of conditions. Night vision capabilities further enhance functionality, allowing for clear monitoring in low-light environments.

In summary, the SVAT Electronics 2CV500 - 4CH is a versatile surveillance system that brings together advanced recording technology, user-friendly setup, and robust durability. With its ability to accommodate multiple cameras, high-definition recording, and remote viewing options, it is an excellent choice for individuals looking to enhance their security infrastructure. Ideal for both homes and businesses, the 2CV500 stands out as a reliable solution in today’s ever-evolving landscape of security technology.