LST BCnet216: 19 manual Permanent Connection, Network Expansion of BC216-1CE, Specifications

Permanent Connection

A variety of peripheral devices can be connected to the fi re detection control panel Series BC216-1CE and to the BCnet sectional control panel BC216-3CE:

• Fire brigade key safe	• Transmitting device for the actuation of pagers via
• Fire brigade control unit	ESPA protocol
• Acoustic and optical signaling devices	• Modules for remote parameterisation and remote
• External protocol printer	maintenance via computer newtork, modem or GSM
• Remote display and operating panels	connection
• Remote indication unit	• Transmitter module for the transmission of messages
• Actuations	via SMS or e-mail
• Electronic monitoring system	– and much more.

Network Expansion of BC216-1CE

By installing a Network Interface Module NIF5-1M in the Fire Detection Control Panel BC216-1CE, the latter can be integrated as BCnet sectional control panel with dis- play and operating fi eld into a Fire Detection Control

Panel BCnet216. All sectional control panels are con- nected with each other via a redundant high-security network (the Global Security System network GSSnet).

Extinguishing Control System

If required, the BC216-1CE or the BCnet216 can be easily expanded to an extinguishing control panel ac- cording to EN 12094-1. The extinguishing control panel LC216-1 controls up to 8 fl ooding zones in one extin- guishing system, without hardware redundancy. The networked extinguishing control panel LCnet216 can control up to 127 fl ooding zones in a maximum of 127 extinguishing systems.

The function of the extinguishing control panel is fully

integrated into the fi re detection control panels Series BC216, a combined operation is therefore possible. The LC216-1 and LCnet216 are certifi ed to EN 54-2, EN 54-4, EN 12094-1 and VdS as a pure extinguishing control panel and as a combined fi re detection and ex- tinguishing control panel.

The networked extinguishing control panel LCnet216 can be optionally implemented with full hardware red- undancy.

Specifications

Mains voltage	230VAC +10/-15%, 50Hz
Connection power	60VA
Output voltage	typ. 28VDC
Output peak current	max. 1.8A
Connection of external devices	typ. 0.8A, site-specifi c
Own current consumption at 24V	typ. 90mA (without optional componentries)
Ambient temperature	-5°C to +50°C
Dimensions W × H × D	478 × 266 (6 height units) × 95 (mm)
Colour	gray-white, RAL 9002
Weight without accumulator	approx. 6kg
Approvals (EN 54-2, EN 54-4)	VdS G201017
	FT 14/147/3/99 (Austria)

Building Safety. Building Security.

A

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27	BC216CE_DBL_LST_EN_0804.PDF • PAGE 4
OFFICE@LST.AT • WWW.LST.AT • ALL RIGHTS RESERVED