•Wall Hanging or Free Standing.
Optional Probe w/ 10 Foot Wire
FIGURE 2
Remote
Temperature Sensor
LCD Temperature Display
Bracket
ADDITIONAL EQUIPMENT (not included)
1.Two fresh AA 1.5V alkaline batteries for the wireless weather station.
2.Two fresh AAA 1.5V alkaline batteries for the remote temperature sensor.
3.One, Philips screwdriver for mounting.
QUICK SETUP
Hint: Use good quality Alkaline Batteries; avoid rechargeable batteries.
1.Have the Wireless Weather Station and Temperature sensor 3 to 5 feet apart.
2.Batteries should be out of both units for 10 minutes.
3.Place the batteries into the Temperature sensor first and next into the Wireless Weather Station.
4.DO NOT PRESS ANY BUTTONS FOR 15 MINUTES.
In this time the Wireless Weather Station and the temperature sensor will begin to communicate with each other, and the display will show both the indoor temperature and an outdoor temperature. If the Wireless Weather Station does not display both temperatures after the 15 minutes, please retry the set up as stated above. After both indoor and outdoor temperatures are displayed for 15 minutes you can place your temperature sensor outdoors, and set your time.
The temperature sensor should be placed in a dry, shaded area (ex: under the eve of a roof). The temperature sensor has a range of 330 feet. Any walls that the signal will have to pass through will reduce distance. An outdoor wall or window will have up to 20 feet of resistance and an interior wall will have up to 10 feet of resistance. Your distance plus resistance should not exceed 330 feet in a straight line.
NOTE: Fog and mist will not harm your temperature sensor, but direct rain must be avoided.
4