TS2000
To nc contacts of
Access device*
To nc contacts of
Last Exit device
To nc contacts of
Exit Terminator*
To NU/REM o/p C
To NU/REM o/p B
To NU/REM o/p A
To NU/REM o/p D
* = options
Programme Outputs as Ward X Outputs:
A = Set Fail | C = Set |
B = Exit | D = Alarm |
W.C.U |
| |
ACCESS | SPKR | |
| ||
LAST | ACCESS | |
| ||
EXIT | OUT | |
EXIT | LX | |
OUT | ||
TERMINATE | ||
WARD SET | WARD | |
WARD EXIT | CONTROL | |
SET FAIL | 0V | |
WARD ALARM | +12V |
Programme circuits in ward X
A = Ward Control
B & C = Night
To Loudspeaker
Connect other side to 0V
To NU/REM Cct C.
C+ and I/P C
To NU/REM Cct B.
B+ and I/P B
To NU/REM Cct A.
A+ and I/P A
12V power supply input
Power supply must be sufficient to power the Loudspeaker (1A). Do not use Network power.
Connect 0V to Network 0V.
Figure 9 TS2000 Ward Control Unit - Connections
WCU
LK2 LK1
Exit Mode
Terminals
Settle Exit Entry RV3 RV2 RV1
| Open | Closed |
Link 1 | Timed Set | Last Exit Set |
Link 2 | Last Exit Set* | Exit Terminator Set* |
* Only if link 1 is closed
Timers:
RV1 = Entry Time 0 - 255 secs RV2 = Exit Time 0 - 255 secs
RV3 = Exit Settling Time 0 - 40 secs
Figure 10. Ward Control Unit - Layout and Settings
496529 Issue A | 11 of 20 | TS2000 |