Node Unit NU, Remote Keypad Node Unit REM

TS2000

Node Unit (NU)

The NU comprises a small two part polycarbonate case containing a single pcb on which are terminal blocks. The unit is connected to the control network and is a control and connecting device for four circuits and four programmable outputs. It also contains a sounder output and a sounder mute output. It has no external controls hence it may be positioned at any convenient location as access is normally only required for maintenance. The unit is surface mounted and has cable entry points in the base top and bottom.

Remote Keypad Node Unit (REM)

The REM comprises a small two part polycarbonate case containing a pcb and the system controls consisting of:

1.A 15 key tactile keypad for entering data and programming the system. When in use the keypad is illuminated;

2.A liquid crystal display (LCD) of two lines of 20 characters each which provides system status information and gives directions when programming the system.

The unit is connected to the control network and is a control and connecting device for four circuits and four programmable outputs. The base contains a terminal block for all external connections and the unit is fitted with an internal sounder which provides local alarms and system status sounds. The unit is surface mounted and has cable entry points in the base on all four sides.

The REM’s are used to control and programme the system hence they must be positioned at suitable control positions with easy access.

Ward Control Unit (WCU)

The WCU comprises the same case as the NU and contains a single pcb on which are terminal blocks. If fitted the unit acts as a control and interface device to allow a designated Ward to be Set and Unset using its own dedicated Exit and Entry route and units. The WCU may be positioned at any location normally adjacent to its Exit/Entry devices and to its controlling REM or NU. The unit is surface mounted and has cable entry points in the base top and bottom. It contains controls for its Ward for setting the entry time, exit time and settling time and links to select the type of exit procedure.

System Control Network

The CP supplies power to and monitors all the connected NU and REM via a six or eight wire Control Network. Each connected unit is ’daisy chained’ to the Network and the maximum permitted distance between units is 100m but the furthest unit in a full system is limited to a total cable length of 1 km from the CP.

Network										REM
										or
										NU
Ward Control Circuits
Ward Control Circuits
Ward Control (A)
Ward Control (A)
Last Exit Out (B)
Last Exit Out (B)
Access Out ( C)
Access Out ( C)

Network

Ward Control Outputs:

Ward Set Fail (A)

Ward Exit (B)

Ward Set (C)

Ward Alarm (D)

Loudspeaker					Ward
Loudspeaker

					Control
12V Supply					Unit

Last Exit/Entry(LX Con)

Access (Acc Con)

Exit Terminate (ET Con)

Figure 3. Ward Control Unit Schematic

496529 Issue A

7 of 20

TS2000

TS2000 specifications

The Security Centres TS2000 is a cutting-edge security system designed to provide advanced monitoring and protection for various applications. Its comprehensive features, technologies, and characteristics make it a go-to solution for businesses and organizations seeking robust security measures.

One of the primary features of the TS2000 is its modular design, allowing for easy customization to suit the specific needs of different environments. Users can select the appropriate modules based on their security requirements, ensuring that all critical areas are adequately protected. This flexibility also enables users to expand their systems over time as their security needs evolve.

The TS2000 incorporates state-of-the-art video surveillance technology, supporting high-definition cameras that deliver crystal-clear images and video feeds. With its advanced video analytics capabilities, the system can detect unusual behaviors and alert security personnel in real-time. This proactive monitoring significantly enhances security response times and ensures that potential threats are identified before they escalate.

Furthermore, the TS2000 is equipped with robust access control mechanisms, allowing organizations to manage who can enter specific areas. This feature is vital in high-security environments, where restricted access is necessary. The system supports various authentication methods, including key cards, biometrics, and mobile credentials, ensuring a seamless and secure entry process.

Integration is another significant characteristic of the TS2000. The system can easily connect with other security devices, such as alarm systems, fire detectors, and environmental sensors. This interconnected approach creates a centralized security footprint, offering users a comprehensive overview of their security landscape in a single interface.

Reliability is one of the hallmarks of the TS2000. Built with durability in mind, the system is designed to operate continuously without downtime, ensuring consistent protection. Additionally, the TS2000 utilizes advanced encryption protocols to safeguard transmitted data, ensuring the integrity and confidentiality of sensitive information.

User-friendly interfaces are essential for effective security management, and the TS2000 excels in this area. Its intuitive software allows security personnel to monitor, manage, and respond to incidents efficiently. Whether accessed via desktop or mobile devices, the system provides real-time alerts and notifications, empowering users to act quickly.

In conclusion, the Security Centres TS2000 stands out as an advanced, versatile, and reliable security solution suitable for various applications. Its modular design, advanced video surveillance, robust access control, and seamless integration capabilities position it as a leader in the security market. With features that enhance user experience and operational efficiency, the TS2000 is a proactive defense system that ensures the safety and security of any environment.