Alarm Paging, Receiver Power-On | SECO-LARM USA E-37EV specification

ENFORCER E-37EV Alarm Pager System

Alarm Paging

∙When triggered by either the purple (+), green (-), or blue (-) triggers, the receiver will beep (or vibrate) continuously for 1 minute in groups of 9.

∙The Page LED will indicate which transmitter is sending the signal (Green, Red, or Orange).

∙The Zone LED will indicate which trigger was triggered.

-Positive trigger (purple wire) will flash green.

-Negative trigger #1 (green wire) will flash red.

-Negative trigger #2 (blue wire) will flash orange.

∙Press the ON/ /OFF button after 30 seconds to stop the indicator.

Receiver Power-On

∙The receiver will beep (or vibrate) once each time the receiver is turned on.

Unattended Indicator

∙The receiver will beep (or vibrate) once every 30 seconds to remind the user that it received a page signal from the transmitter.

∙Press the ON/ /OFF button to stop the indicator.

Low-Battery Indicator

∙The receiver will beep (or vibrate) twice following power-on if the batteries are low.

∙The receiver will also beep (or vibrate) twice every 60 seconds when the batteries are low.

Viewing the Page Memory

∙Scroll back the page signal memory by pressing the ON/ /OFF button repeatedly.

∙The receiver remembers the last 6 page signals received.

∙Page signals will be shown one by one, beginning with the most recent.

∙The receiver will beep once for an alarm page, but will not beep for a manual page.

∙The receiver will beep three times to indicate that all signals have been viewed, or that no signals are stored.

∙Two consecutive page signals carrying the same information are treated as one.

∙Turning off the receiver will erase all stored signals.

Warning

∙Ensure that an antenna is connected before connecting power to the unit. Failure to do so may damage the transmitter.

∙Do not open the receiver or transmitter cases. All adjustments have been made at the factory. There are no user serviceable parts inside.

∙Holes marked 1, 2, and 3 on the transmitter case are factory set. Do not make any adjustments in these holes.

∙Use only AAA size 1.5V alkaline batteries for the receiver.

SECO-LARM U.S.A., Inc.

E-37EV specifications

The SECO-LARM USA E-37EV is a state-of-the-art access control device designed to enhance security for various applications. Known for its reliability and advanced features, this electronic door strike is the perfect solution for both commercial and residential setups.

One of the main features of the E-37EV is its versatility in accommodating different types of door configurations. It is designed to work efficiently with both fail-safe and fail-secure applications, providing flexibility depending on security needs. This makes it suitable for use in high-security facilities, offices, and residential homes.

The E-37EV incorporates cutting-edge technology, including a Dual-Voltage input that allows it to operate at either 12VDC or 24VDC. This not only simplifies installation but also enhances compatibility with a wide range of access control systems. The device comes with a built-in dual color LED status indicator that visually communicates the operational status, ensuring users are well-informed about the status of the door strike.

Another characteristic that sets the E-37EV apart is its robust construction. It is built with heavy-duty materials that are designed to withstand wear and tear, ensuring longevity and reliability in any environment. Additionally, it features a high-strength, stainless-steel housing that resists rust and corrosion, making it ideal for both indoor and outdoor applications.

In terms of security features, the E-37EV is equipped with advanced locking mechanisms that provide enhanced locking strength. It comes with a built-in delayed release function, allowing for a programmable unlocking delay, which can add an extra layer of security by preventing unauthorized entry.

Installation is made straightforward with this device, as it includes all necessary mounting hardware and detailed instructions. With its compact design, the E-37EV can be easily integrated into existing structures without significant modification.

Additionally, the E-37EV provides a smooth operation, characterized by a quiet and efficient release mechanism that seamlessly integrates with electronic access systems. This allows for an unobtrusive user experience while maintaining high security.

Overall, the SECO-LARM USA E-37EV electronic door strike offers a combination of advanced technology, robust construction, and versatile applications. Its features make it a top choice for anyone looking to enhance their security measures while ensuring ease of use and installation.