Security Centres 808 Resetting Customer and Installer Codes First stage reset, Load Defaults

Page 17

808

Resetting Customer and Installer Codes

Resetting Customer and Installer Codes (First stage reset)

If the installer and/or user codes have been lost, or you need to return the end station to the factory default access codes, you can load the default codes as follows:

1.Disconnect mains and battery power to the system.

2.Place a small screwdriver blade between the pins marked ‘RST’ on the main PCB.

3.Apply battery and then mains power to the end station.

4.Remove screwdriver blade from RST pins after three seconds.

The system loads the factory default access codes. (1234 for User and 7890 for Installer.) All user attributes return to default values.

In addition, the system re-initialises communications with all keypads.

The remaining programming is unchanged.

Return to Factory Defaults (Second stage reset)

If you need to return the end station to factory defaults (no programming and an empty log) then:

1.Follow steps 1 to 4 in ‘Resetting Customer and Installer Codes’.

2.Reset any alarms by keying-in the default User code and pressing Enter.

3.Key-in 0 (zero) followed by the default Installer code and then press Menu.

 

The display shows:

MENU NO OR LEVEL

4.

Press 0.

 

 

The display shows:

0:INST PROG

5.

Press Enter.

 

 

The display shows:

REMOVE LID

6.Open the end station tamper switch.

The display shows:

LOAD DEFAULTS

Note: At this point you can press Menu to abort the process of loading factory defaults.

7. Press Enter.

 

The display shows:

SURE

Note: At this point you can press Menu to abort the process of loading factory defaults.

496336 Issue 1

17 of 22

Image 17
Contents Compatible Equipment 808808 Introduction927 LCD Keypad Technical Specification Zone Wiring 808 Zone WiringKeypads Software LimitsEnabling/Disabling Keys, Display and Sounder Enabling/Disabling Keys, Display and SounderWiring 927 Keypads Wiring808 Wiring Detector Zones Wiring Detector ZonesWiring FSL zones Programming Initial Power UpSYS DIS RST REQ Menu no or LevelMenu No Category You have now reached the Installer programmingFinding Menu Items Test outputs, speaker, sounder and keypad sounder Programming Chart 808Bell Run Time, Bell Delay 808 Programming ChartCorrecting mistakes Changing Menu ItemsZone Programming Changing Menu Items 808ZO3-NU To select a zone numberTo select the zone type To allocate the zone to an areaZone 03 Z03-NAME Entering TextTo store the changes you have made 13. Press Enter To Return to the User Mode From Programming Leaving Programming ModeFor Key SpaceEngineer Reset Re-entering Programming ModeReturn to Factory Defaults Second stage reset Resetting Customer and Installer Codes First stage resetLoad Defaults Resetting Customer and Installer CodesInstaller programming Menu 10 Account Name Factory DefaultsMenu 20 Zone Type Menu 30 Program zonesGeneral Faults No response from the keypad keys Fault FindingConfiguration Checking Error Messages No exit/entry tones from remote keypadUser Facilities Keyswitch ZonesArming STN NON KEY Z in LAOperating the System Operating the SystemInstaller Setting 808 Installer Setting

808 specifications

Security Centres 808 is designed to provide advanced monitoring and protection solutions tailored for various environments, including commercial, residential, and industrial sectors. Utilizing state-of-the-art technologies, Security Centres 808 offers a comprehensive approach to security that integrates physical and digital protection measures.

One of the primary features of Security Centres 808 is its advanced surveillance system. This system includes high-definition cameras with night vision capabilities, motion detection, and remote access through mobile applications. Users can monitor live feeds from their property in real-time, allowing for prompt responses to potential security breaches. The system can also be integrated with smart home technologies, enabling seamless control over lighting, alarms, and locks.

Another significant characteristic of Security Centres 808 is its use of artificial intelligence (AI) for threat detection. The system can distinguish between normal and suspicious activities, significantly reducing false alarms and enhancing response efficiency. AI algorithms analyze patterns and behaviors, enabling predictive analysis and proactive measures against potential breaches.

The platform also features robust alarm systems, including both audible and silent alerts. When a threat is detected, users receive instant notifications via text or app alerts, ensuring that they are always informed of their security status. The response can be customized according to individual preferences, providing flexibility and peace of mind to users.

Central to the effectiveness of Security Centres 808 is its integration with other security technologies, such as access control systems and biometric scanners. These features enhance user authentication and ensure that only authorized personnel can enter secure areas. This multi-layered approach to security not only protects physical spaces but also safeguards sensitive data and assets.

Additionally, Security Centres 808 prioritizes user experience with its intuitive interface. The control panel is designed for ease of use, allowing users to quickly understand and manage their security settings. Comprehensive training and 24/7 customer support further enhance user confidence in the system.

In conclusion, Security Centres 808 stands out for its combination of advanced surveillance, AI-driven threat detection, alarm systems, and user-friendly technology. Its integrated approach provides a robust security solution that meets the diverse needs of modern users, ensuring safety and peace of mind in an increasingly complex security landscape.