Security Centres 808 manual Programming, Initial Power Up, Sys Dis Rst Req, Menu no or Level

Page 8

Programming

808

2k2 EOL

4k7

Alarm contacts

Tamper Loop

Zone 1

CCT

Note: When wiring FSL zones, link out the anti-tamper terminals of each zone in use

on the main connnector and expander cards.

Zone 1

AT

Figure 4. Wiring Diagram for Single Alarm Contacts and Tamper Wiring

With the loop in a normal state and the alarm contacts closed (shorting out the 4K7 resistor), the total resistance of the loop is 2K2 ohms. When the alarm loop is opened and the short removed from the 4K7 resistor, the resistor is brought into the circuit and the resistance of the loop is increased to 6K9 causing the end station to detect an alarm condition. If a tamper device is opened, the loop resistance will be open circuit and the end station will detect a tamper signal.

The wiring resistance should be restricted to a maximum of 100 ohms. The recommended maximum cable distance per zone is 200 - 300 metres.

Programming

Initial Power Up

Note: Depending on the status of the system when it is powered-up, e.g., open tampers etc., some screens may differ from those shown below.

1.Apply battery power first, then connect the mains.

The keypad display shows the Software version number followed by the date.

After 3 seconds, the display shows the time:

16:07

2.Key in the factory default user code (1234) and press Enter.

The display shows one of the following messages depending on how

the system is currently set up:

SYS DIS RST REQ

3.Key-in the factory default installer code zero (0) + 7890, then press Menu.

The display shows:

MENU NO OR LEVEL

8 of 22

496336 Issue 1

Page 7 Page 9
Image 8
Page 7 Page 9
Contents 808 Compatible Equipment808 Introduction927 LCD Keypad Technical Specification Zone Wiring Zone Wiring 808Keypads Software LimitsEnabling/Disabling Keys, Display and Sounder Enabling/Disabling Keys, Display and SounderWiring Wiring 927 Keypads808 Wiring Detector Zones Wiring Detector ZonesWiring FSL zones Initial Power Up ProgrammingSYS DIS RST REQ Menu no or LevelMenu No Category You have now reached the Installer programmingFinding Menu Items Programming Chart 808 Test outputs, speaker, sounder and keypad sounder808 Programming Chart Bell Run Time, Bell DelayChanging Menu Items Correcting mistakesZone Programming Changing Menu Items 808To select a zone number ZO3-NUTo select the zone type To allocate the zone to an areaZone 03 Z03-NAME Entering TextTo store the changes you have made 13. Press Enter Leaving Programming Mode To Return to the User Mode From ProgrammingFor Key SpaceRe-entering Programming Mode Engineer ResetResetting Customer and Installer Codes First stage reset Return to Factory Defaults Second stage resetLoad Defaults Resetting Customer and Installer CodesFactory Defaults Installer programming Menu 10 Account NameMenu 20 Zone Type Menu 30 Program zonesFault Finding General Faults No response from the keypad keysConfiguration Checking Error Messages No exit/entry tones from remote keypadKeyswitch Zones User FacilitiesArming STN NON KEY Z in LAOperating the System Operating the SystemInstaller Setting Installer Setting 808

808 specifications

Security Centres 808 is designed to provide advanced monitoring and protection solutions tailored for various environments, including commercial, residential, and industrial sectors. Utilizing state-of-the-art technologies, Security Centres 808 offers a comprehensive approach to security that integrates physical and digital protection measures.

One of the primary features of Security Centres 808 is its advanced surveillance system. This system includes high-definition cameras with night vision capabilities, motion detection, and remote access through mobile applications. Users can monitor live feeds from their property in real-time, allowing for prompt responses to potential security breaches. The system can also be integrated with smart home technologies, enabling seamless control over lighting, alarms, and locks.

Another significant characteristic of Security Centres 808 is its use of artificial intelligence (AI) for threat detection. The system can distinguish between normal and suspicious activities, significantly reducing false alarms and enhancing response efficiency. AI algorithms analyze patterns and behaviors, enabling predictive analysis and proactive measures against potential breaches.

The platform also features robust alarm systems, including both audible and silent alerts. When a threat is detected, users receive instant notifications via text or app alerts, ensuring that they are always informed of their security status. The response can be customized according to individual preferences, providing flexibility and peace of mind to users.

Central to the effectiveness of Security Centres 808 is its integration with other security technologies, such as access control systems and biometric scanners. These features enhance user authentication and ensure that only authorized personnel can enter secure areas. This multi-layered approach to security not only protects physical spaces but also safeguards sensitive data and assets.

Additionally, Security Centres 808 prioritizes user experience with its intuitive interface. The control panel is designed for ease of use, allowing users to quickly understand and manage their security settings. Comprehensive training and 24/7 customer support further enhance user confidence in the system.

In conclusion, Security Centres 808 stands out for its combination of advanced surveillance, AI-driven threat detection, alarm systems, and user-friendly technology. Its integrated approach provides a robust security solution that meets the diverse needs of modern users, ensuring safety and peace of mind in an increasingly complex security landscape.
Top Page Image Contents