Kramer Electronics user manual Technical Specifications1 of the VP-719DS

Technical Specifications

7.4 Upgrading Firmware

To install the latest Kramer firmware version on a VP-719DSunit, connect the COM port on your PC to the RS-232 port on the VP-719DSunit, as section 5.1 describes, and go to the Kramer Web site at this URL: http://www.kramerelectronics.com for the latest information.

8 Technical Specifications

Table 6 includes the technical specifications:

Table 6: Technical Specifications1 of the VP-719DS

Inputs:	VIDEO: 2 x composite video 1 Vpp/75 Ω on RCA connectors; 2 x Y/C (s-Video)
	1 Vpp (Y), 0.3Vpp (C) / 75 Ω on 4 pin connectors; 1 x Component (Y, Pb/Cb,
	Pr/Cr) on RCA connectors; 1x VGA (VGA/SVGA/XGA/UXGA) on an HD15F
	connector; and 1x DVI connector
	AUDIO: 3 x stereo audio on RCA connectors (for VIDEO 1, VIDEO 2 and
	COMPONENT) and 1x PC audio on a 3.5mm mini socket
Outputs:	VIDEO: 1 x VGA/SVGA/XGA/UXGA on an HD15F connector
	AUDIO: 1 x stereo audio on RCA connectors
Output Resolutions:	VGA (640x480), SVGA (800x600), XGA (1024x768), SXGA (1280x1024), UXGA
	(1600x1200), 1024x852, 1024x1024, 1366x768, 1365x1024, 1280x720,
	720x483, 852x480, 1400x1050, as well as a user definable output mode
Control:	Front panel buttons/ OSD, IR remote control, RS-232 on a DB-9 connector
Additional Controls:	Different vertical refresh rates, ProcAmp control, output image scaling and
	aspect ratio change
Firmware:	Frame freeze, digital zoom 4X, Flesh tone (special color processing), Gamma setting
H Frequency:	15.63~90kHz
V Frequency:	50~100Hz
Computer Resizing:	Auto-resizing to panel pixel number
RGB Video Signal:	RGB, 1.0 Vpp, 75 Ω
RGB Sync Signal:	Separate H/VTTL, composite sync, analog
Audio Input/Output	0~0.5 Vrms
Voltage:
Plug and Play:	DDC1 / DDC2B
De-interlacing:	Adaptive and pixel based
Film mode detection:	2:2 / 3:2 pull down reverse
Power Source:	100-240 VAC, 50/60 Hz, 30VA automatic power supply
Dimensions:	19" (W), 9.3" (D) 1U (H) rack mountable2
Accessories:	IR remote control, power cord3
Weight:	3 kg (6.6 lbs.) approx.

1 Specifications are subject to change without notice

2 When installing a Kramer machine on a closed or multi-unit rack assembly, be aware that the operating ambient temperature of the rack environment may be greater than room ambient. In particular, take care that there is sufficient air flow. (Refer to the "Operating Conditions.pdf" file on our Web site at http://www.kramerelectronics.com (click "FAQs" in the Technical Support section))

3 We recommend that you use only the power cord that is supplied with this machine

32 KRAMER: SIMPLE CREATIVE TECHNOLOGY