Kramer Electronics VP-719DS user manual Your Seamless Switcher / Scaler

Your Seamless Switcher / Scaler

a source, freezing that source, or deactivating that source (and displaying a blank screen)

•Includes a front panel lock

•Incorporates full ProcAmp1 processing for video and audio correction

•Offers high quality de-interlacing 3:2/2:2 pull down2

•Can provide non-linear scaling for 4:3, 16:9 transformation3

•Supports firmware upgrade via RS-232

•Includes non-volatile memory that retains the last setting, after switching the power off and then on again

Control the VP-719DS:

•From the front panel OSD control buttons

•Remotely, from the infra-red remote control transmitter

•Remotely, via RS-232

Achieving the best performance means:

•Connecting only good quality connection cables, thus avoiding interference, deterioration in signal quality due to poor matching, and elevated noise levels (often associated with low quality cables)

•Avoiding interference from neighboring electrical appliances that may adversely influence signal quality and positioning your Kramer VP-719DSaway from moisture, excessive sunlight and dust

4 Your Seamless Switcher / Scaler

Figure 1, Table 1 and Table 2 define the front and rear panels of the VP-719DS.

1 Processing amplification enables adjustment of different video and audio signal parameters

2 Accommodates the frame-rate of a converted movie (24 frames per second) to video frequencies (25 frames per second (PAL); 30 frames per second (NTSC)

3 See Figure 16

3