7.Turn the Humidity Dial to the desired volume of humidity. Turn towards the right and the humidity level increases; turn towards the left and the humidity level decreases.
8.As soon as the Refill LED lights up, the unit will shut off automatically. Refill tank with water and unit will automatically continue running.
•Always unplug the unit before servicing it in any way.
•The water temperature of the water remaining in the unit after use may be high.
•Do not submerse the unit in the water, or allow water to enter the inside of the unit.
INSIDE THE BODY OF THE UNIT
Pour excess water out of the unit, but do not allow it to enter the blast port. Wash out the unit with fresh water using the cleaning brush and a soft cloth as needed.
OUTER SURFACE OF THE UNIT
Wipe the surface of the unit with a soft, damp cloth if needed.
WATER TANK
If water spots remain in the water tank, wipe the inside down with a soft cloth. Do NOT use soap or detergents.
ULTRASONIC DISK
Remove the tank (Fig. 1) and use the enclosed cleaning brush to regularly remove build up and deposits from the disk area (Fig. 2).
**Diluted white vinegar will help to prevent this build up.
*Clean the disk with the brush only. No other cleaning tool should be used. BRUSH ONLY. (Fig. 2)
|
| **DO NOT scrub or |
|
| scrape the ultrasonic |
(Fig. 1) | (Fig. 2) | disk. Disk must be |
cleaned gently, ONLY as |
described in this manual.
•Fully dry the inside and outside of the unit before storing it.
•DO NOT leave water in the unit.
•Store in a cool, dry place.