4. INSTALLATION
An EDH5240 camera may be mounted in two ways: surface mount and flush mount. Select the one that meets your needs.
Installation - Surface Mount
1. Paste the drilling template on the ceiling or wall. Please refer to the drilling template below.
2.Use the appropriate tool to drill the INNER holes, and a clearance hole for the power and video wires.
Note: The minimum recommended material thickness is 1 cm.
3.Use the plastic anchors and push them into the 4 small holes, to fix the outer ring into ceiling or wall.
4.Remove dome cover (4 captive hex head screws); remove inner base from outer base (4 Phillips head screws – retain these for later
- 8 -