EverFocus EHH5200 specifications Mounting Camera 1 Drill the Holes

Page 11

Do not expose the camera to water or moisture while open during installation, nor try to operate it while open in wet areas. Once properly installed and sealed, the dome is IP66 rated against water infiltration.

3.1Mounting Camera

3.1.1 Drill the Holes

1.Paste the drilling template on the ceiling or wall

2.Drill 4 holes, 1 for the power/video cable, 3 for screws A, B and C.

Screw hole A

 

 

 

 

 

 

Screw hole C

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Installation sticker

Screw hole B

Wire outlet hole for

Surface mounting

Power/Video Cable

Screw A,B,C

Camera base

- 10 -

Image 11
Contents Operation Instructions Do not install the camera near electric or magnetic fieldsTable of Contents Page Package Contents Main FeaturesPage Pickup Device 7 2 megapixel Cmos sensor Specifications123mm x 107.8mm 4.8 x DimensionsFront Panel Layout Camera Component DescriptionFront And Back Panel Layout Exterior view Base Outer Cover ring Rotatable coverZoom Ring Test Video Output ConnectorBack Panel Layout External Light Sensor Installation Mounting Camera 1 Drill the Holes Mounting Power input Wall Mount Adjusting Camera Adjusting Camera PositionVideo out Connect with Test Monitor Adjusting Zoom and FocusAlign the window in the cover with the lens Camera SettingCorrect Wrong not aligned Access the user setup menu screen OSD Menu & ConfigurationMenu Tree RedExposure FaultWhite Balance Control Select Return to return to the previous menu ResolutionDay/Night SpecialEffect Sharpness Image AdjustEverFocus Electronics Corp