HDD management, Playback Mode | First Alert HS-4705-400 instruction

Record/Search Menu

Basic Operation

playback

Basic Operation

HDD management

Playback

PLAYBACK Mode

Playback and Record Search

View recorded video on the system through the RECORD SEARCH Menu. To begin playback:

1.There are two ways to access the VIDEO SEARCH menu. Right-click anywhere on the screen and select VIDEO SEARCH from the Quick Access Menu. The RECORD SEARCH Menu opens, or from the Main Menu select SEARCH.

NOTE: When you first open the RECORD SEARCH Menu, it displays the cur- rent month and date.

2.Click PLAYBACK to playback the last minute of recorded video (Quick Search) OR Under CHN select a specific channel or select ALL.

3.Under DATE, enter a date using the Virtual Keyboard (mouse only).

4.Click SEARCH. Recorded events on the system appear in red (alarm events— includes both alarm and motion events) and green (normal recording).

5.Click a date in the Month Grid to search for video files.

6.Click a time block in the Hour Grid to view the video. Playback begins.

7.Move the mouse slightly to display the on-screen play back controls. You can also use the playback control with buttons on the remote control or front panel of the system.

On-screen Playback

Controls

To use the on-screen playback controls:

1.Click the VCR-like controls to play, pause, fast forward, rewind, and slow down playback.

2.Drag the slider to adjust the volume (audio capable camera required, not included). Select the box to mute the audio.

3.Click X to quit playback and return to the Search menu.

		Month Grid
		Month Grid
On-screen Playback Controls		Hour Grid
		Hour Grid

8. Under RECORD STATE, the system shows recorded events in a Month
Grid and a Time Grid. The selected day of the month will be outlined in
	Record State
red. Green=normal recording; Red=alarm recording (includes both alarm

and motion events). Click a date in the month grid to view recorded video files for that selected date in the hour grid.

File List

Use the FILE LIST sub-menu to see a detailed list of all the recorded video on your system. To open the FILE LIST:

1.From the RECORD SEARCH Menu, click SEARCH to search the system for recorded video.

2.Click FILE LIST at the bottom of the menu. The FILE LIST menu opens.

To use the File List:

1.Under TYPE, select NORMAL to view only normal recordings, ALARM, to view alarm recordings (includes alarm and motion detection), or ALL to view all video on your system.

2.Use the buttons on the side panel to navigate the file list:

•FIRST: Jump to the first page of the list

•PRE: Turn to the previous page

•	NEXT: Turn to the next page	File List Menu
•	LAST: Jump to the last page of the list

• ALL: Select all files

• OTHER: Toggles selections between checked and unchecked

• BACKUP: After selecting a file(s), click to begin copying the data to a USB flash drive (not included);

3. Click any file to begin playback.

Backup

Use the FILE LIST sub-menu to find recorded video on your system and copy it to a USB flash drive (not included).

NOTE: The system is compatible with most major brands of USB flash drives, with capacities from 256 MB to 4 GB.

To backup recorded data:

1.Connect a blank USB flash drive to the top USB port on the front panel of the system.

2.Open the FILE LIST menu and search for recorded data on the system as shown above.

3.Select the file you want to backup and click the “BACKUP” box next to the

file name. Select	multiple files if desired. Click ALL to select all files;				click
OTHER to deselect all files. NOTE: The size of each		file is	shown in	the File
List menu. Use this to help you find a USB flash drive		large	enough	to	hold
all the files you	wish to backup.

4.Click BACKUP from the side-panel to immediately begin copying the files to the USB flash drive. NOTE: Backup progress appears in the status win- dow. DO NOT remove the USB flash drive during backup.

5.When the space in backup device is less than recording file, the system will prompt “Space not enough”...

6.You can remove USB device directly when backup is finished

USB Backup

Warning!. Do not remove the

USB drive during backup.

HDD Management

Hard Drive and USB Options:

The HDD button displays essential information about the system`s internal hard drive, and lets you format the internal HDD and external USB flash drive (not included). If there is no hard drive in DVR, or the DVR cannot read the hard drive, or the hard drive is not formatted, it will display a red “H” in the video preview interface. To access this menu, from the MAIN MENU click HDD.

The HDD menu displays the following:

1.HDD STATUS: The system will display “OK” for normal operation

2.SIZE: The size (in gigabytes) of the internal hard disk drive. The size of your system`s internal hard drive will vary by model

3.FREE SPACE: The space (in gigabytes) remaining on the system`s internal

HDD

4.AVAILABLE TIME: The recording time (in hours) remaining on the HDD based on your current record settings

5.OVERWRITE: Select ENABLE or DISABLE. If Overwrite is enabled, the system will record over the oldest video data once the HDD is full. If Overwrite is disabled, the system will stop recording once the HDD

is full and the “FULL” LED on the front panel of the system will light up.

Formatting the Internal Hard Drive

If you installed a new hard drive, you must format the hard drive in the DVR before it can be used. Clicking on the HDD FORMAT button will begin the formatting process. After for- matting, the system will restart. ATTENTION: Formatting the

internal HDD erases all video data. This step cannot be Undone.

Backup Menu & Warning Notice

Backup Successful Notice

HDD Management

Hard Drive Format Warning

Page 20

Page 21