First Alert DWS-471, DWS-472 user manual Installation, Setting UP the Wireless Receiver

Page 9

INSTALLATION

CAMERAS & WIRELESS RECEIVER 4

INSTALLING CAMERAS

1.Select the position for the camera and secure the camera stand. (Screws and anchors are supplied. Use an appropriate screw type for the mounting surface.)

2.Screw the camera onto the bracket.

3.Adjust camera to the proper view angle Make sure the lens is upright relative to your subject. Tighten the thumb bolt.

4.Screw the antenna into place on the rear of

the camera. Adjust the antenna to an upright position.

5. Connect the power cable to the DC IN of the camera.

6. Plug the power supply into the electrical outlet.

7.Once the camera is connected, see Camera Setup, Camera Pairing to link the camera(s) to the receiver.

Camera Orientation

It’s important the camera is mounted correctly to ensure the image is not upside down as the camera lens can only be positioned one way.

SETTING UP THE WIRELESS RECEIVER

1.Connect the power cable to the DC IN of the receiver.

2.Plug the power supply into the electrical outlet.

3.Once the receiver is connected, see Camera Setup, Pairing (Operating Menus) to link the camera(s) to the receiver.

OPTIONAL: VIEW ON TELEVISION OR OTHER MONITOR

1.If connecting to another monitor such as a TV: Connect the AV cable into the AV OUT of the receiver.

2.Connect the two RCA jacks to the TV

AV IN. Yellow = Video; White = Audio

3. Press POWER button to turn on the

Audio

 

receiver.

Video

Rechargeable Battery

Caution: The 7” monitor is fitted a 3.7V 2000mAH (LI-ON) rechargeable battery pack. At the end of life, it should not be disposed of with household waste. Please recycle where the facilities exist.

Check with your local authority or retailer for recycling advise.

TV

Page 9

Image 9
Contents Security System Welcome IntroductionMain Description Product FeaturesIntroduction Safety Precautions SafetyFCC Compliance DisposalWHAT’S in the BOX Product OverviewFront Panel Side Panel Display IndicatorsSetting UP the Wireless Receiver InstallationMain Menu System OperationCamera Pairing Camera Setup MenuCamera Activation Camera Brightness AdjustmentRecord Schedule Recorder Setup MenuAudio/Video Recording Format Memory Card Motion Detection SensitivityRecord Time Setup Masking AreaPlayback Channel Record Indicators Date & Time Setup System SetupPower Saving Multi Channels Idle Display Setup Language TV OUT Setup Ntsc or PALZoom Alarm BuzzerMemory Card Overwrite Scan Activated CamerasPC Playback Software PC OperationPlayback Software Installation PC Operation Appendix System MAP AppendixReceiver Camera Technical SpecificationsProduct Limited Warranty WarrantyBRK Brands, Inc Jarden Corporation Company Nysejah

DWS-472, DWS-471 specifications

First Alert has long been a trusted name in home safety and security, and their DWS-472 and DWS-471 smart smoke and carbon monoxide detectors exemplify their commitment to innovation and reliability. Both models are designed to provide advanced safety features while offering convenience and ease of use for homeowners.

The First Alert DWS-472 is a state-of-the-art smoke and carbon monoxide detector that utilizes both photoelectric and ionization sensors. This dual-sensor technology enables the unit to identify a broader range of fire types, including smoldering fires and fast-flaming fires, ensuring a faster response time. Additionally, the DWS-472 features a 10-year sealed battery, eliminating the need for frequent battery replacements, which can often be a safety oversight. The device is equipped with a voice alert system that clearly announces the type of danger detected, whether it's smoke or carbon monoxide, allowing users to react appropriately.

On the other hand, the DWS-471 offers similar features but with some distinct aspects tailored for consumer needs. This model focuses on carbon monoxide detection with a highly sensitive electrochemical sensor. It also includes a photoelectric sensor for smoke detection, making it a reliable option for various fire scenarios. The DWS-471 is designed with a sleek, compact profile, making it easy to install in various locations throughout the home.

Both models are compatible with the First Alert onelink app, a further testament to modern technology integration. This app enables homeowners to monitor and manage their alarms remotely, receive push notifications for alerts, and even silence false alarms with a simple tap on their smartphones. The app enhancing the overall security experience and providing peace of mind, especially when away from home.

Further enhancing their appeal, both the DWS-472 and DWS-471 feature a test/silence button for easily checking functionality. They come with an end-of-life warning that informs users when it is time to replace the unit, ensuring that detectors remain operational.

Overall, the First Alert DWS-472 and DWS-471 combine advanced sensor technology, user-friendly features, and smart connectivity to create a robust line of protection that meets the needs of modern homeowners, while exemplifying First Alert's commitment to safety and reliability.