Testing Personal Passcode, Closing safe | First Alert 2074F, 2079EF

Testing Personal Passcode

Enter new code: 3-8 digits followed by the “A” or “B” key. Ready light flashes along with a beep

Green light

Lift the handle within 5 seconds. The safe automatically relocks in 5 seconds if you take no action

Hold the handle and pull the door open

If safe fails to open with your Personal Passcode, try the following:

1.Check to see if the batteries have been installed properly and replace if necessary.

2.Lock-out may have occurred. Wait 15 minutes before trying again.

3.Contact SISCO / BRK Consumer Affairs Department.

SECURITY LOCK-OUT PERIODS:

Important:

If your safe has an interior light, the switch is located inside the safe door.

NOTE: The batteries will run down if you do not turn off the light. The light bulb is not user replaceable.

For added security, the safe will automatically “Lock-out” entry for 15 minutes after three attempts to open with an invalid Passcode.

To lock the safe, press the handle down. If the handle is not

fully closed, the safe will remain unlocked or will not re-open	3