Power Switch and Connectors, Cleaning and Maintenance

SCANNER LEDs

When you first turn on the scanner, all three lights illuminate momentarily and then flash as the scanner goes through a series of self-tests.

Power (green): illuminates and stays on for power.

Ready (green):

•flashes when the lamps are warming up

•illuminates when the scanner is ready to scan

•off when the scanner is in Standby mode

Error (red): illuminates or flashes when there is an error condition.

POWER SWITCH AND CONNECTORS

Power switch Power port

SCSI ports

USB port	Terminator	SCSI ID
	switch	selector

Power switch — turns the scanner on and off.

Power port — connects the power cord to the scanner.

SCSI ports — two 50-pin, high-density connectors provide SCSI connections to the scanner.

NOTE: Kodak i80 Scanner: use the 50-pin Amphenol- style connector. The DB25 connect is not supported.

USB port* — connects the scanner to the PC.

Terminator switch — allows you to turn SCSI termination on or off if the scanner is at the middle or the end of a SCSI chain.

SCSI ID selector — allows you to assign a specific device ID to the scanner.

* Not available on the Kodak i80 Scanner.

CLEANING AND MAINTENANCE

For detailed cleaning and replacement procedures, see the Maintenance chapter in the User’s Guide.

CLEANING THE FEED MODULE

Kodak Digital Science Roller Cleaning Pads are recommended for cleaning the feed module and rollers.

1. Open the ADF cover.

2.To remove the feed module, squeeze the plastic clamps that hold the feed module in place and pull the feed module out of position.

3.Wipe the feed module from top to bottom.

4.Inspect the feed module. If worn or multi-feeding continues after cleaning, replace the feed module.

5.Reinstall the feed module by pushing it into position, aligning the feed module into the slots, until it snaps into place.

6.Close the ADF cover.

CLEANING THE PLATEN GLASS

1.Open the flatbed cover.

2.Wipe the flatbed platen glass with a fresh Staticide wipe.

3.Wipe the flatbed platen glass with a dry Staticide wipe.

4.Close the flatbed cover.

CLEANING THE ROLLERS

The scanner transport rollers and imaging area should be cleaned routinely for optimum performance. Some paper types and operating environments require cleaning more often than specified in the User’s Guide. Whenever paper feeding and image quality are less than desirable follow these steps.

1.Open the ADF cover.

2.With a roller cleaning pad, wipe the feed rollers from side to side. Rotate the feed rollers to clean the entire surface.

IMPORTANT: The Roller Cleaning Pad contains sodium lauryl ether sulfate which can cause eye irritation. Refer to the User’s Guide for MSDS acquisition.

3. Dry the rollers with a lint-free cloth.

CLEANING THE IMAGING AREA

1.Remove dust and debris from this area by using a Stati- cide wipe or a small brush. Be careful not to scratch the glass when cleaning.

2.Wipe the imaging area with a Staticide wipe.

IMPORTANT:Staticide wipes contain isopropanol which can cause eye irritation and dry skin. Wash your hands with soap and water after performing maintenance procedures. Refer to the User’s Guide for MSDS acquisition.

3.Wipe the imaging area again with an almost-dry Staticide wipe to remove any streaks.

I80 specifications

The Kodak i80 is a high-performance document scanner designed for businesses that require efficient and reliable document management solutions. Known for its advanced capabilities, the i80 excels at handling various document types, making it a versatile addition to any office environment.

One of the standout features of the Kodak i80 is its exceptional scanning speed. With the ability to scan up to 100 pages per minute, this scanner is equipped to handle large volumes of documents without compromising quality. This efficiency is particularly beneficial for businesses that require quick access to scanned information.

The i80 supports a wide range of media types, including plastic cards, business cards, and even long documents, all of which can be scanned seamlessly. This flexibility is enhanced by the scanner's robust paper handling capabilities, which include automatic feeding and the ability to handle mixed batches of documents. The scanner's intelligent document protection features help prevent misfeeds and jams, ensuring a smooth scanning experience.

In terms of image quality, the Kodak i80 does not disappoint. It utilizes advanced image processing technology to deliver high-resolution scans with remarkable clarity. The scanner offers customizable settings for resolution and color depth, allowing users to tailor the output to their specific needs. Features such as automatic image cropping, deskewing, and enhancements like brightness and contrast adjustments further contribute to the quality of the scans.

The Kodak i80 is also equipped with an intuitive user interface, making it easy for users to operate and monitor the scanning process. The LCD display provides real-time information about the scanning progress and alerts users to any potential issues, enhancing productivity.

For organizations concerned about document security, the i80 includes various features designed to protect sensitive information. Secure scanning options ensure that scanned documents are encrypted, while customizable user access controls restrict scanning functions to authorized personnel only.

Additionally, the Kodak i80 is compatible with a wide range of software applications, allowing for seamless integration into existing document management systems. This compatibility ensures that scanned documents can be easily indexed and retrieved, enhancing overall workflow efficiency.

In summary, the Kodak i80 is a powerful document scanner that combines speed, versatility, and high-quality imaging capabilities. Its advanced features make it an ideal solution for businesses looking to streamline their document processing and improve overall productivity. With its user-friendly design and robust technology, the Kodak i80 stands out as a reliable choice for any modern office.