DMP Electronics XR10 All/Perimeter System Arming, System Ready/System Not Ready Keypad Displays

Page 11

All/Perimeter System Arming

Area Assignment: Your security system is divided into two separate areas. Motion detectors, inside doors, and other interior protection devices are assigned to the Interior area while windows and exterior doors are assigned to the Perimeter area.

Perimeter or All: When arming an All/Perimeter system, the keypad

displays PERIM ALL. If you select ALL, you arm both the Perimeter and the Interior of the system. You’ll want to arm both of these areas when leaving with nobody left inside. Selecting PERIM arms only the Perimeter of the system. Perimeter arming is for when you’re staying inside but want the comfort of knowing the exterior doors and windows are armed. Perimeter arming allows you to move freely about inside without setting off any interior alarms.

System Ready/System Not Ready Keypad Displays

When all zones in the system are in a normal condition, the keypad displays SYSTEM READY. If there are one or more zones that are not in a normal condition, the keypad displays SYSTEM NOT READY. Pressing any top row SELECT key during this display shows the zone name allowing you to investigate the problem.

Bypass and Force arming

When one or more zones are in a non-normalcondition, the keypad displays OKAY BYPASS STOP. Select OKAY to force arm the bad zones. Force armed zones that restore to normal while the system is armed are included back into the system. Select BYPASS to bypass the bad zones. Bypassed zones that restore to normal while the system is armed are NOT included back into the system. Use the bypass feature to remove a zone from the system that is temporarily out of service. This is a useful feature during remodeling when doors or windows are being removed.

Arming an All/Perimeter System

1. Enter your user code. The keypad displays PERIM ALL.

2.Select PERIM to arm the Perimeter area only.

3.Select ALL to arm both the Perimeter and Interior areas.

4.The keypad displays any zones that have been bypassed prior to arming and 24 hour zones that are in a bad condition.

5.Bypass or force arm any bad zones if required. See below:

5a. If a problem exists on a zone, the zone name and problem is displayed followed by OKAY BYPASS STOP.

5b. Select OKAY to force arm the bad zone.

5c. Select YES to bypass the bad zone.

5d. Select STOP to stop the arming. Correct the problem on the zone and return to step 1.

6.The Security Command displays PERIMETER ON if only the perimeter is being armed and ALL SYSTEM ON if both the perimeter and interior are being armed.

7.The Security Command next displays EXIT: ## INSTNT and begins to count down the number of seconds remaining for you to exit. When the delay expires, all zones are armed.

8.You can select INSTNT while EXIT: ## INSTNT is displayed to immediately arm all exit zones and make them instant zones without exit or entry delays. The keypad displays INSTANT.

9.When the system is fully armed, the keypad displays PERIMETER ON for perimeter arming and ALL SYSTEM ON for perimeter and interior arming.

Arming and Disarming

7

Page 10 Page 12
Image 11
Page 10 Page 12
Contents User’s Guide Area Systems Silencing an Alarm All/Perimeter and Home/Away SystemsTable of Contents Security Command Users GuideEmergency Evacuation Plans Test Your System Weekly Security Command keypadAbout Your Security System Parts of the SystemSelect keys Security Command KeypadCharacter Keypad User Options Menu System Trouble or Service Required Special Security Command MessagesSpecial Security Command Tones Understanding Security System Terms Armed Status Exit ErrorCentral Station Monitoring StatusArming Functions How your System OperatesArming an All/Perimeter System All/Perimeter System ArmingSystem Ready/System Not Ready Keypad Displays Bypass and Force armingDisarming an All/Perimeter System Disarming During an AlarmAll/Perimeter System Disarming Arming a Home/Away System Home/Away System ArmingDisarming a Home/Away System Easy Exit FeatureHome/Away System Disarming User Checkin Security Command User MenuSensor Reset Turning the Outputs On and Off Using the Bypass Zones FunctionOutputs On Off Bypass ZonesZone Monitor Using the Zone Monitor Function10 3812Master Using the System Test FunctionSystem Test User CodesSystem Options Standard Master Ambush CodesUser Code Authority Levels Adding User Code NumbersChanging User Code Numbers Deleting User Code NumbersDisplay Using the Display Events FunctionDisplay Events Zone Bypass Event DisplaysDisplay Description Zone Event DisplaysArming and Disarming Event Displays System Monitor Event Displays Request for ServiceUser Code Change Event Displays User Checkin Event DisplaysOutputs System SetupSecurity Command keypads Area Name Pager Direct Users GuideZone, Area, or User Number Account NumberMessage ID Page Digital Monitoring Products
Related manuals
Manual 26 pages 5.81 Kb

XR6, XR10 specifications

DMP Electronics has set a new standard in the audio industry with the introduction of the XR6 and XR10 models. These innovative devices cater to both audiophiles and casual listeners, providing unparalleled sound quality, robust features, and cutting-edge technology that enhance the listening experience.

The XR6 is designed with a compact form factor, making it perfect for smaller spaces without compromising on audio quality. It boasts a powerful 60-watt RMS output, ensuring clear and dynamic sound reproduction across various music genres. Its advanced acoustic design features a dual-driver configuration that delivers rich mids and crisp highs, creating an immersive audio experience. The XR6 also includes Bluetooth connectivity, allowing users to stream music wirelessly from their smartphones, tablets, or other devices.

In contrast, the XR10 takes things a step further, incorporating a larger driver system that supports an impressive 100-watt RMS output. This model is ideal for larger rooms or outdoor settings where a more substantial sound performance is desired. Both models feature DMP’s proprietary SoundEnhance technology, which optimizes audio performance by analyzing and adjusting the sound output according to the room's acoustics. This unique feature ensures that users enjoy consistent audio quality, irrespective of their listening environment.

Another highlight of the XR series is the user-friendly interface. Both the XR6 and XR10 come equipped with a digital display and an intuitive control panel, allowing users to navigate settings easily. The inclusion of multiple input options, such as USB, RCA, and a 3.5mm aux input, ensures compatibility with a wide array of devices, making them versatile additions to any audio setup.

Durability is a key characteristic of the XR series, with the models equipped with a robust housing that minimizes vibration and enhances sound clarity. The sleek, modern design complements any décor, ensuring that the devices are not only functional but also aesthetically pleasing.

DMP Electronics has also focused on sustainability, with both the XR6 and XR10 designed to be energy efficient, reducing their environmental impact. In a time when conscious consumerism is on the rise, such features resonate with eco-friendly users seeking high-performance audio solutions.

In conclusion, the DMP Electronics XR6 and XR10 are impressive additions to the audio market, combining high-quality sound, innovative technology, and user-friendly design. Whether for casual listening or serious audiophile use, these models promise to elevate the audio experience to new heights.
Top Page Image Contents