DMP Electronics XR10, Command Processor Panel manual Zone Information

Page 16

8 - ZONE INFORMATION

8.1

ZONE INFORMATION

ZONE INFORMATION

This allows you to define the operation of each protection zone used in the system.

A description of each programming option follows:

8.2

ZONE NO: –

ZONE NUMBER

8.3

NAME: * UNUSED *

Enter the number of the zone you intend to program. Press COMMAND to enter a zone name. For instructions on entering alphanumeric characters, see section 1.7.

ZONE NAME

8.4

ZONE TYPE: BLANK

Press the SELECT key and enter up to 10 characters for the zone name. A name must be given to each zone in the system. This name can be displayed at the keypads when the zone is bad or viewed in Display Events. The zone name is also sent to the receiver as part of a zone event report.

A zone that is not part of the system must be marked *UNUSED*. To mark a zone unused, delete the old name by pressing a top row SELECT key, then press the COMMAND key. The programmer automatically programs the name as * UNUSED *. If you selected DEFAULTS? NO YES to clear the panel's memory during Initialization, the zones will already be marked * UNUSED *. See section 2.3.

ZONE TYPE

– –

NT

DY

EX

 

 

 

 

 

 

 

 

F I

PN

EM

SV

 

 

 

 

 

 

 

 

A1

A2

FV

AR

 

 

 

 

The Zone Type defines the panel's response to the zone being opened or shorted. See the chart in section 8.4A.

When you assign a Zone Type to a zone, responses are made automatically for the zone. There are 11 Zone Types to choose from including Blank. The functional details of each response are described in section 8.4A.

To enter a new Zone Type, press a top row SELECT key. The display lists the four Zone Types shown below.

Blank, Night, Day, or Exit. Press COMMAND to display additional zone types.

Fire, Panic, Emergency, or Supervisory. Press COMMAND to display additional zone types.

Auxiliary 1, Auxiliary 2, Fire Verify, or Arming. Press the ARROW key to display the previous zone types.

When the Zone Type you want to select is displayed, press the SELECT key beneath its name. The chart in section 8.4A gives an outline of the Alarm Action for each Zone Type.

If you select Blank, Night, Day, Exit, Auxiliary 1, or Auxiliary 2 as the Zone Type, the zone must be assigned to an area.

If you select Fire, Panic, Emergency, or Supervisory as the Zone Type, these are 24 hour zones that are always armed and no area assignment is needed.

Press COMMAND to continue.

Refer to the Appendix section in this guide for zone type descriptions.

8.5

AREA : PERIMETER

AREA NAME

INT BDRM PERIM

Press a SELECT key to assign this zone to one of the following areas: INTERIOR, BEDROOMS, or PERIMETER.

INT (Interior) - Assigns the zone to area 2, Interior.

BDRM (Bedroom)- Assigns the zone to area 3, Bedrooms. This option is only displayed in Home/Away systems.

PERIM (Perimeter) - Assigns the zone to area 1, Perimeter.

XR10 Programming Guide

2841 E. Industrial Drive Springfield, MO 65802-6310 800-641-4282

12

Page 15 Page 17
Image 16
Page 15 Page 17
Contents XR10 Command Processor Panel Programming Guide Model XR10 Programming Guide Table of Contents System Options Output OptionsZone Information SET Lockout CodeGetting Started Before You BeginProgramming Menu Reset Timeout Programmer Lockout CodesSpecial Keys IntroductionEntering Alpha Characters Entering Non-Alpha CharactersKeypad Prompts Display Current Programming Bell TST YESInitialization CommunicationHow to set the Recall Test time Test FreqAlarm No YES Backup no First Phone noPAGER? no YES 16B SPV Trbl no YES 16C O/C User no YES Test RPTRemote Options Remote OptionsMFG Auth no Armed Rings Disarm RingsSystem Reports System Options Output Options Closing Wait operationOutput Action Exit OUTReady OUT Armed OUTZone Information Momentary keyswitch operation Next ZN? no YES Next Zone Alarm Action Disarmed OpenARM Areas Perim ALL Home Sleep Away9A MSG Trouble Output noAction STD PLS MOM Folw Swgr BYPEntry Delay CRS Zone noCross Zone PriorityStop SET Lockout CodeSET Lockout Code Changing the Lockout CodeFalse Alarm Reduction Features Status List11.3 4-2 reporting operation Appendix= This function is not enabled for this zone type Zone Type SpecificationsDescription of the programmable zone options Zone Type Descriptions Manual telephone line seizureHow it works NBRFor Series XR10 Command Processor Panels Default panel programmingProgramming Information 11.8 4-2 Communication Reports How to Read this Table1st 1st Digit Description 2nd Digit 2nd Digit Description 11.11 4-2 Communication Format Configuration 11.10 4-2 ExamplesNumeric Pager Message Formats Message ID Descriptions
Related manuals
Manual 28 pages 40.09 Kb

XR10, Command Processor Panel specifications

DMP Electronics has set a new standard in the audio industry with the introduction of the XR6 and XR10 models. These innovative devices cater to both audiophiles and casual listeners, providing unparalleled sound quality, robust features, and cutting-edge technology that enhance the listening experience.

The XR6 is designed with a compact form factor, making it perfect for smaller spaces without compromising on audio quality. It boasts a powerful 60-watt RMS output, ensuring clear and dynamic sound reproduction across various music genres. Its advanced acoustic design features a dual-driver configuration that delivers rich mids and crisp highs, creating an immersive audio experience. The XR6 also includes Bluetooth connectivity, allowing users to stream music wirelessly from their smartphones, tablets, or other devices.

In contrast, the XR10 takes things a step further, incorporating a larger driver system that supports an impressive 100-watt RMS output. This model is ideal for larger rooms or outdoor settings where a more substantial sound performance is desired. Both models feature DMP’s proprietary SoundEnhance technology, which optimizes audio performance by analyzing and adjusting the sound output according to the room's acoustics. This unique feature ensures that users enjoy consistent audio quality, irrespective of their listening environment.

Another highlight of the XR series is the user-friendly interface. Both the XR6 and XR10 come equipped with a digital display and an intuitive control panel, allowing users to navigate settings easily. The inclusion of multiple input options, such as USB, RCA, and a 3.5mm aux input, ensures compatibility with a wide array of devices, making them versatile additions to any audio setup.

Durability is a key characteristic of the XR series, with the models equipped with a robust housing that minimizes vibration and enhances sound clarity. The sleek, modern design complements any décor, ensuring that the devices are not only functional but also aesthetically pleasing.

DMP Electronics has also focused on sustainability, with both the XR6 and XR10 designed to be energy efficient, reducing their environmental impact. In a time when conscious consumerism is on the rise, such features resonate with eco-friendly users seeking high-performance audio solutions.

In conclusion, the DMP Electronics XR6 and XR10 are impressive additions to the audio market, combining high-quality sound, innovative technology, and user-friendly design. Whether for casual listening or serious audiophile use, these models promise to elevate the audio experience to new heights.
Top Page Image Contents