DMP Electronics XR10 manual Programmer Lockout Codes, Reset Timeout, Special Keys, Introduction

Page 6

1 - INTRODUCTION

1.4Programmer Lockout Codes

Although the XR10 panel allows you to enter the built-in Programmer without a lockout code, we recommend you install one to restrict programming access to only those persons your company authorizes. You can do this by using the SET LOCKOUT CODE feature at the end of the Programmer menu.

Installing a lockout code

1.After entering the Programmer menu, the keypad displays PROGRAMMER. Press the COMMAND key to advance through the programming sections until SET LOCKOUT CODE displays (after STOP).

2.Press any top row SELECT key. At the ENTER CODE: - display, enter a 1 to 5 digit programmer lockout code. Press COMMAND.

3.The displays shows ENTER AGAIN. Enter the same lockout code again and press COMMAND. The display shows CODE CHANGED. The new code number must now be entered before the Programmer menu can be accessed.

Write the lockout code number down and keep it in a secure place with access limited to authorized persons.

Lost Lockout Code requires factory reset: If you lose or forget the lockout code, the panel must be sent back to the factory to be reset. There is no field option for gaining access to the panel without a valid lockout code.

1.5Reset Timeout

The XR10 has a feature that requires you to enter the Programmer within 30 minutes of resetting the panel. After 30 minutes, if you attempt to program by entering the 6653 (PROG) code, the keypad displays: RESET PANEL. You must reset the panel and enter the program code within the next 30 minutes.

If you are already in the Programmer and do not press any keys on the programming keypad for 30 minutes, the panel terminates programming. All data entered up to that point is saved in the panel's memory.

Using the Stop routine disarms all areas: To exit the panel's Programmer you must use the Stop routine. The Stop routine does the following:

Disarms all areas

Clears the panel's Status List

The programming function is then terminated and the keypads return to the Status List.

1.6Special Keys

COMMAND Key

The COMMAND key is used to advance through the programming. Pressing the COMMAND key allows you to go forward through the programming menu and through each step of a programming section. As you go through the programming, the keypad display shows any current programming already stored in the panel's memory.

The COMMAND key is also used to enter information into the panel's memory such as phone numbers or zone names. Press the COMMAND key after you've entered the information and it is being displayed correctly on the keypad.

 

 

 

 

 

SELECT Keys

1

2

3

 

4

POWER

 

 

A B C

 

DEF

GHI

JKL

 

5

6

7

 

8

 

MNO

 

PQR

STU

VWX

COMMAND Key

9

0

 

 

COMMAND

YZ

ARROW Key

 

 

 

ARROW Key

Figure 1: Keypad Function keys

Use the ARROW key to back up one step while in the

programming menu or within a programming section. The ARROW key also allows you to correct an error by erasing the last character entered.

SELECT Keys

The top row of keys are called the SELECT keys. When the Programmer displays an option for you to select, such as YES or NO, you press the SELECT key under the option you want to enable.

The SELECT keys also allow you to change programming information currently in the panel's memory. As you step through each program option, the keypad displays the current information. To change this information, press the appropriate key under the display then enter the new information through the keypad.

XR10 Programming Guide

2841 E. Industrial Drive Springfield, MO 65802-6310 800-641-4282

2

Page 5 Page 7
Image 6
Page 5 Page 7
Contents XR10 Command Processor Panel Programming Guide Model XR10 Programming Guide Table of Contents Zone Information System OptionsOutput Options SET Lockout CodeBefore You Begin Getting StartedProgramming Menu Special Keys Reset TimeoutProgrammer Lockout Codes IntroductionKeypad Prompts Display Current Programming Entering Alpha CharactersEntering Non-Alpha Characters Bell TST YESInitialization CommunicationHow to set the Recall Test time Test FreqPAGER? no YES Alarm No YESBackup no First Phone no 16B SPV Trbl no YES 16C O/C User no YES Test RPTMFG Auth no Armed Rings Remote OptionsRemote Options Disarm RingsSystem Reports System Options Output Options Closing Wait operationReady OUT Output ActionExit OUT Armed OUTZone Information ARM Areas Momentary keyswitch operationNext ZN? no YES Next Zone Alarm Action Disarmed Open Perim ALL Home Sleep AwayAction STD PLS MOM Folw 9A MSG TroubleOutput no Swgr BYPCross Zone Entry DelayCRS Zone no PrioritySET Lockout Code StopSET Lockout Code Changing the Lockout Code11.3 4-2 reporting operation False Alarm Reduction FeaturesStatus List AppendixZone Type Specifications = This function is not enabled for this zone typeDescription of the programmable zone options How it works Zone Type DescriptionsManual telephone line seizure NBRDefault panel programming For Series XR10 Command Processor PanelsProgramming Information How to Read this Table 11.8 4-2 Communication Reports1st 1st Digit Description 2nd Digit 2nd Digit Description Numeric Pager Message Formats 11.11 4-2 Communication Format Configuration11.10 4-2 Examples Message ID Descriptions
Related manuals
Manual 28 pages 40.09 Kb

XR10, Command Processor Panel specifications

DMP Electronics has set a new standard in the audio industry with the introduction of the XR6 and XR10 models. These innovative devices cater to both audiophiles and casual listeners, providing unparalleled sound quality, robust features, and cutting-edge technology that enhance the listening experience.

The XR6 is designed with a compact form factor, making it perfect for smaller spaces without compromising on audio quality. It boasts a powerful 60-watt RMS output, ensuring clear and dynamic sound reproduction across various music genres. Its advanced acoustic design features a dual-driver configuration that delivers rich mids and crisp highs, creating an immersive audio experience. The XR6 also includes Bluetooth connectivity, allowing users to stream music wirelessly from their smartphones, tablets, or other devices.

In contrast, the XR10 takes things a step further, incorporating a larger driver system that supports an impressive 100-watt RMS output. This model is ideal for larger rooms or outdoor settings where a more substantial sound performance is desired. Both models feature DMP’s proprietary SoundEnhance technology, which optimizes audio performance by analyzing and adjusting the sound output according to the room's acoustics. This unique feature ensures that users enjoy consistent audio quality, irrespective of their listening environment.

Another highlight of the XR series is the user-friendly interface. Both the XR6 and XR10 come equipped with a digital display and an intuitive control panel, allowing users to navigate settings easily. The inclusion of multiple input options, such as USB, RCA, and a 3.5mm aux input, ensures compatibility with a wide array of devices, making them versatile additions to any audio setup.

Durability is a key characteristic of the XR series, with the models equipped with a robust housing that minimizes vibration and enhances sound clarity. The sleek, modern design complements any décor, ensuring that the devices are not only functional but also aesthetically pleasing.

DMP Electronics has also focused on sustainability, with both the XR6 and XR10 designed to be energy efficient, reducing their environmental impact. In a time when conscious consumerism is on the rise, such features resonate with eco-friendly users seeking high-performance audio solutions.

In conclusion, the DMP Electronics XR6 and XR10 are impressive additions to the audio market, combining high-quality sound, innovative technology, and user-friendly design. Whether for casual listening or serious audiophile use, these models promise to elevate the audio experience to new heights.
Top Page Image Contents