Installation Instructions contd, Wrning

Installation Instructions (cont'd)

Venting (cont'd)

Gas Piping

All vent gases must be completely vented to the outdoors of the structure (dwelling). Installonly the draft hood provided with the new water heater and no other draft hood.

Vent pipes must be secured at each joint with sheet metal screws.

CHIMNEY

RISE?:OPER LINEAR.EAR

VENT PIPE INSTALLATION

There must be a minimum of 6" dearance between single wall vent pipe and any combustible materi_l. Fill and seal any clear- ance between single wall vent pipe and combustible material with mortar mix, cement, or other noncombustible substance.

For other than single wall, follow vent pipe manufacturer's dear- ance specifications. To insure a tight fit of the vent pipe in a brick chimney, seal around the vent pipe with mortar mix

cement.

AWARNING

Make sure the gas supplied is the same type listed on the model ra_ng plate. The inlet gas pressure must not exceed Ifl.S in. water column (2,6k_) for natural gasor 13 i_ water column (3.2kPa) for propane (LR) ge_ The minimum inlet gas prossum listed on the model rating plate is for the pur- poseof input ad'FWanont.

AWARNING

If the ges conerolvalve is subjecU_ to pressuresexceeding 'A pound per square inch (3.Side), the damage tO the gascon.

trnl vaJvecould reanlt in a fire or explosionfrom lealdngga_

A W'_RNING

If the main gas line shutoff servingaJl gasappliancesk used, alsoturn "OFF" the gasat each appliance.Leaveall gasappli- antes shut of/until the water heater installationiscomplete. ]

AWARNING

Failureto haverequireddexrdncesbetweenvent pipingand combustiblematerialwillresultina firehazard.

A WARNING

Be sureventpipeisproperlyconnectedto prevonte_capeof dangerousfluegaseswhichcouldcausedeadly_/x_tion.

AWARNING

Chemicalvaporcorrosionof the flue and vent systemmay occurtf air for combustioncomainscert_ chemicalvapor_ Spraycanpropellants,cleaningsolvents,refrigeratorand air conditionerrefrigerants,swimmingpool chemicals,calcium andsodiumchloride,waxes,bleach,andprocesschemicalsare typicalcompoundswhicharepotenti_dlycorrosive.

A gas llne of sufficient size must be run to the water heater. Consult the latest edition of National Fuel Gas Code ANSI

Z223.1, also referred to as NFPA54 and the gas company concern- ing pipe size.

There must be:

•A readily accessible manual shut offvalve in the gas supply line serving the water heater, and

•A drip leg (sediment trap) ahead of the gas control valve to help

prevent dirt and foreign materials from entering the gas control

valve.

•A flexible gas connector or a ground joint union between the shutoffvalve and control valve to permit servicing of the unit.

Be sure to check all the gas piping for leaks before lighting the water heater. Use a soapy water solution, not a match or open flame. Rinseoff soapy solution andwipe dry.

Standard Models are for installation up to 3,300 feet above sea level.

High Altitude Models are for installation from 3,300 to 5,500 _t abo_e sea level.

Ifa standard model is installed above 3,300 feet or a high altitude model is installed above 5,500 feet, the input rating must be reduced at the rate of 4 percent for each 1,000 feet above sea level. Contact your local Sears Service Center or gas utility for further information.

153.336151, 153.336851, 153.336351, 153.336251, 153.336812 specifications

The Kenmore 153 series of microwave ovens, which includes models 153.336912, 153.336312, 153.336351, 153.336151, and 153.336751, represents a blend of innovative technology, user-friendly features, and aesthetic appeal. These appliances are designed to cater to various cooking needs while ensuring efficiency and reliability.

One of the standout features across the Kenmore 153 series is their power and cooking performance. Most models are equipped with a robust wattage capacity, allowing for fast and even cooking. This power translates to the ability to quickly heat up meals, effectively defrost frozen items, or even perform gourmet cooking tasks.

In addition to their impressive wattage, these microwaves boast advanced cooking technologies such as sensor cooking, which automatically adjusts the cooking time and power level for optimal results. This feature takes the guesswork out of cooking, ensuring that users achieve perfectly cooked dishes without the need for constant monitoring.

The Kenmore 153 models are designed with versatility in mind. Many of them include multiple cooking modes, such as popcorn, baked potato, and reheat settings. This variety allows users to tailor their cooking experience according to their meal needs. Moreover, the inclusion of a grill function in select models offers the capability to achieve that desirable grilled finish on various foods.

User convenience is another priority in the Kenmore 153 series. The intuitive control panels are designed to be easy to navigate, featuring clear buttons and a bright display. Some models also offer preset cooking options, making it simple to prepare specific dishes with just the touch of a button. Furthermore, the spacious interiors found in these microwaves can accommodate larger plates and containers, facilitating the preparation of family-sized meals.

On the design front, the Kenmore 153 series features sleek, modern aesthetics that can seamlessly integrate into any kitchen décor. The stainless-steel finish provides a stylish look while also ensuring durability and ease of cleaning.

Safety is a critical aspect of kitchen appliances, and the Kenmore 153 microwaves come equipped with essential safety features such as child locks and automatic shut-off. These features foster a safe cooking environment, especially in homes with young children.

In summary, the Kenmore 153.336912, 153.336312, 153.336351, 153.336151, and 153.336751 microwave ovens stand out due to their powerful cooking performance, innovative technologies, and user-centric features. With versatile cooking options, intuitive controls, and a modern design, they offer a comprehensive solution for contemporary cooking needs while prioritizing safety and convenience.