Kenmore 116.31732, 116.31722 owner manual Toselectapileheightsetting, Suggested Pile Height Senings

Page 7

Toselectapileheightsetting:

Turn off cleaner. Select a pile height setting by tilting the cleaner back until front wheels are lifted slightly off the floor as illustrated.

Slide the adjustment lever to the correct setting.

SUGGESTED PILE HEIGHT SE'N'INGS

You may need to raise the height to make some jobs easier, such as scatter rugs and longer pile carpets. Suggested settings are:

HIGH: shag carpet, long pile, plush, scatter rugs.

MED: medium to long pile.

LOW: short to medium pile.

EX LOW: very low pile.

SOME MODELS

Bare floor setting: Slide the carpet]bare

floor selector all the way back and down toward the bottom of the nozzle until it locks

into place.

In this position the brush assembly does not revolve. This setting should be used for cleaning hardwood and tile floors and when any attachments (tools) are used.

Carpet setting: Slide the selector all the way forward and up to the carpet position.

In this position the brush assembly wilLturn. When carpets are being cleaned the selec- tor should be in this position.

Attention: Refer to your carpet manufac- turers cleaning recommendations. Some more delicate carpets may require that they be vacuumed with the agitator turned off, to prevent carpet damage.

iiiiiiii¸

I 'WARNING

Personal Injury Hazard

DO NOT place hands or feet under-

neath the unit when changing from the bare floor to the carpet pile height setting,The agitator begins to revolve rapidly when the vacuum is turned on and is in the carpet set- ting,

!CAUTION

Do not allow vacuum cleaner to remain in one spot for any length of time when the agitator Is turning. Damage to carpet may occur,

Note: For longer belt life, turn vacuum off before moving selector, otherwise make sure

the selector is pushed fully and quickly as

possible to the desired position. Failure to do so can cause the belt to rub on the

selector shaft and may result in the belt

becoming hot and creating a burning rubber smell.

Carpet/Bat_

Floor Selector

To Carpet

Position

To Bare Floor

Position

\

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Vacuum Cleaner Full ONE-YEAR Warranty VV, Warning Some Models UseReviewthesebeforeusingyourcleanerHandle Assembly IlK Usingascrew- driver,tighten thescrewOutlet, reverse the plug. If it stilldoes not Suggested Pile Height Senings ToselectapileheightsettingTo USE Atiachments Handle MountedInserting To Operate Suction Control SlideTelescoping Wand with TelescopingFloor Brush and Wand Some Models Cleaning Area AttachmentTo Store Attachments Extension HoseMotor Protection Performance IndicatorSystem Optic ceils Whenever the dust bin is cleaned To Clean Dirt Sensor OpticsDirt Sensor Attachments used in dirty areas Locked Upright Tore the cleaner in a dryThey are washed.They could leave marks To Empty Dust BIN AlwaysemptythedustbinwhendirtPushing in at Primary FilterTo Replace Primary Filter To Remove Primary FilterFoam Filter SecondarySlide latches Outward Remove nozzle To Remove BeltOut LetBelt Routing To Clean AgitatorTor is in the carpet position Front edge Make sure the headlight wires are tucked securely in placeEach end is AgitatorUnplug OffNot plug in or turn on until Uum is completely reassembled To Remove Light BulbTurningcoun- terclockwise to Light bulb careTo Replace Agitator To Check AgitatorTo dlt Electrical shock or personal injury Cleaning the unit, Failure18004694663 Www,sears.com Get it fixed, at your home or ours.I

116.31722, 116.31732 specifications

The Kenmore 116.31732 and 116.31722 are high-performing canister vacuum cleaners, designed for efficiency and ease of use. These models are well-known for their powerful suction, versatile cleaning capabilities, and convenient features that cater to various cleaning tasks, making them popular choices among homeowners.

One of the standout features of the Kenmore 116 models is their powerful motor. With a robust suction power, these vacuums efficiently capture dirt, dust, and debris from various surfaces, including carpets, hardwood floors, and upholstery. The dual motor system enhances performance, ensuring that users can achieve a deep clean with minimal effort.

These vacuum cleaners also come equipped with a variety of attachments and tools that enhance their versatility. The Kenmore 116.31732 and 116.31722 include a combination of a crevice tool, dusting brush, and upholstery nozzle, allowing users to clean tight spaces, delicate surfaces, and fabric furniture with ease. Additionally, the telescoping wand provides added reach, making it easy to clean high corners or low spaces without straining.

Another significant characteristic of these models is the advanced filtration system. Both vacuums feature a HEPA filtration system that effectively captures allergens and particles, making them an ideal choice for allergy sufferers. This filtration system not only improves indoor air quality but also ensures that the vacuum does not release dust back into the environment, providing a thorough cleaning experience.

Ease of use is a key consideration in the design of the Kenmore 116.31732 and 116.31722. The lightweight construction of the canister design makes it easy to maneuver around the home. Additionally, these models come with a retractable cord, allowing for effortless storage and enhanced safety by reducing clutter.

The user-friendly controls located on the handle provide convenient access to power settings and brush roll activation, allowing for quick adjustments while cleaning. With their sleek design and durable construction, the Kenmore 116.31732 and 116.31722 not only perform excellently but also stand the test of time.

In summary, the Kenmore 116.31732 and 116.31722 are standout canister vacuum cleaners that combine powerful suction, versatile cleaning attachments, and advanced filtration technology. These features, along with their user-friendly design, make them excellent choices for anyone looking to maintain a clean and healthy home environment.
Top Page Image Contents