Z_WARNING
Electrical Shock and Personal Injury Hazard
Disconnect electrical supply before servicing or cleaning the unit. Failure to do so could result in electrical shock or personal injury from vacuum cleaner suddenly starting.
TO REMOVE BELT
Nozzle
uard
t t t
Lay cleaner flat and flip cleaner to expose nozzle base. Base should lay flat and face up. To remove nozzle guard, remove 6 screws.
Rotate/pivot the nozzle guard and pull off.
Lift and remove brushroll. Dispose of old belt.
TO REPLACE BELT OR BRUSHROLL
Motor
Shaft
Slide belt onto motor shaft.
Place new belt in area of brushroll without bristles.
With new belt in place, pull and slide brushroll into nozzle making sure that the brushroll end caps are in the correct orientation. Rotate brushroll manually to make sure belt is properly aligned. Reposition brush cover and 6 screws. Tighten screws securely.
12