BAG Changing

ii !!!!i! ! i i iii!iii2iiiii!iiEiiiiii2iiiiiiii1 iiiii1 i ii1ii i i 1iiiiii i ii

@ i

______1

{_______iii!!!ii!iiiiiiiiii@ 8 iieiiiii@iiill@iiii!

The vacuum cleaner creates suction that

picks up dirt. Rapidly moving air carries the

dirt

to the dust

bag through the

airflow

pas-

/.)

sages. The

dust

bag

lets the air pass

_z/

through,

while

traps

the

dirt.

///

For

best

cleaning

results,

keep

the

air-

Z#/2"

flow

passage

open. Check

the

starred ,,_._7

Motor

areas occasionally

for clogs. Unplug

_,_/

Safety

from

outlet

before

checking.

_4y

Filter Exhaust

\Flit%

For best cleaning results, the dust bag should be changed often. The electronic bag/hose check indicator will come on when

the bag needs to be changed or the airflow is blocked.

NOTE: See PARTS AND FEATURES for Bag Number.

7.The red bag mount will flip forward after removing bag. This will prevent the lid from closing until a new bag is installed.

Note: DO NOT bend or crease the middle

of the cardboard when installing the bag into the bag mount slots.

8, Rotate red bag mount down and

install bag into slots

._4

1. Unplug cord from wall outlet.

2. Remove hose from canister.

3. Pull hood

release out and up, then lift canister

hood.

per instructions

pushing down until the cardboard tab

locks into position and the holes align. Tuck the bag

securely into the bag cavity so that none of it is able to be pinched by the hood.

9, Close and latch canister hood.

4.Disengage

cardboard tab from red bag mount by pulling away and lifting up.

5.Pull bag out of the red bag mount.

Motor'

Safety

_tedBag

Mount

6.Check the

motor safety filter and

replace, if necessary.

10.Reinstall hose.

11.Plug cord into wall outlet.

NEVER REUSE A DUST BAG. Very fine materials, such as carpet freshener, face powder, fine dust, plaster, soot, new carpet lint, etc. can clog the bag and cause it to burst before it is full and may cause damage to vacuum motor. Change

bag more often when vacuuming these materials.