Do this, To Change Temperature Setting | Kenmore Air Conditioner

Air Conditioner Features

(continued)

TO TURN UNiT ON:

i DO THIS:

_---_PRESS ON/OFF

PAD

TO CHANGE TEMPERATURE SETTING:

DO THIS:

TO RAISE

LOWER

®_!ii_iiiiii

TO ADJUST FAN SPEEDS:

DO THIS:

PRESS

SELECT:

NOTE: The following instruction represent the Touch Pad, the

same instructions can be used for the Remote Control.

YOU WiLL SEE:

Note: Tap or hold either up(A) or down(v) button until the

desired temperature is seen on the display. This

temperature will be automatically maintained anywhere between 60F (16C) and 90F (32C). If you want the display to read the actual room temperature. See "To Operate on Fan Only" section on Page 6.

¢,,_t

YOU WiLL SEE:

A 2 Digit Display is used to indicate the Fan Speed setting, from 10 through 99. When the "SLOWER" button is pressed the motor speed will slow clown at various intervals, to a minimum setting of 10. To speed the motor up, press the" FASTER" button. The speed will increase at various intervals to a maximum setting of 99.