Kenmore Air Conditioner To USE Auto Cool Feature YOU will see, To USE Power Saver Feature

Air Conditioner

Features

(continued)

TO USE AUTO COOL

FEATURE:

YOU WILL SEE:

LIGHT On

DO

THIS:

PRESSAUTO

Note: Fan speed starts at high and adjusts to a

slower

speed

as

the

room

temperature

dictates.

For

COOL

example, if the room doesn't get too warm it will stay at the

slowest

speed.

If

the room

temperature

rises

quickly,

such

as a door being

opened,

it

will automatically

go

to

the

highest speed. The fan speeds will readjust back to the

slowest

speed

as

the

room

returns

to

the

original

set

m

temperature.

Press either

the

Fan Slower

or

Fan Faster button

to

adjust the fan speed manually.

TO OPERATE ON FAN ONLY:

DO THIS:

PRESS

MODE BUTTON

/

JCHOOSE FAN ONLY

TO USE THE

POWER SAVER FEATURE:

DO THIS:

PRESS

_ MODE BUTTON

S ...........CHOOSE

YOU WILL SEE:

LIGHT		On
_Note:	Use	this function	only when	cooling		is	not	desired,
such as for room air circulation or to exhaust stale air.
You can choose any fan speed you prefer.
During	this	function, the display will		show		the	actual room
temperature,		not the	set temperature		as	in	the	cooling
mode.

YOU WILL SEE:

On

Note: In this mode, the fan will continue to run for 3 minutes after the compressor shuts off. The fan then cycles on for 2 minutes at 10 minute intervals until the room temperature is above the set temperature, at which time the unit turns back on.

_i®_ii i_!_¸ii

@POWER SAVER